Custom made grips to convert the HW75/P2 back to its roots and accept the .45 grip panels. The grip panels are deep hand checkered Rosewood. They are modified so the screws can handle o-rings and stay snug. A problem always plaguing the 45. Also the standard 1911 grip cut outs (magazine release, detent) have been filled and colored. The screws are ground smaller for the o-rings, polished and blued. The extension is made of a very dense hardwood called Jarrah from Australia. Then painted black. It’s drilled to accept the original Target grip screw and a hole for access to the trigger adjustment screw for making fine adjustments with having to remove the grips. I made one for a fellow member here and another along with it. Probably will not make any more. This may also fit the HW45/P1 with the Target grip. Don’t have one check for sure. And I do not remember how the trigger adjustment screw works on the HW45/P1. The kit includes a pair of Rosewood grip panels, extension block, 4 Allen screws and 4 o-rings. GUN NOT INCLUDED!! $75 plus $5 shipping. Continental U.S only.
Last edited: