As it sits now, I’m at 150ish bar on the reg and getting roughly 45 FPE (shooting JTS 25.39s) by my guesstimate using pellet drop as an indicator (my chrony is not working so I’m not sure how accurate my readings are; I also further substantiated it by the readings other people have gotten after installing their power plenum). Camo wrapped for…well camo and plus it looks cooler. It’s pretty darn accurate at 50 yards (5 shot group pictured below and not even using 25 grains…that was with OLD 21 grain Beeman Kodiaks). It’s not ridiculously heavy…I was able to carry it all day while hunting with no sling. However, I would rather carry something a little less front heavy.
Shot count with it is ridiculous given it’s a 500cc bottle. I have not counted it…but it’s a lot at 45 F.P.E.! It feels like a Dreamline, except it’s cheaper than a dreamline while maintaining same performance.
I have also done modifications to the transfer port (made it bigger). Polished the barrel. Added power plenum + 500cc bottle (fill to 3625 PSI or 250 bar). Please note that although it is currently at 2200 PSI, the rifle is regulated up to 2900 PSI if you decide to push heavier projectiles. I highly recommend sticking to the 25.39s and shooting them faster if you want more power (like 970-990 FPS). If you want to shoot 18.1 grains, I recommend 935 FPS and just back the hammer spring all the way out to see where it’s at.
It has a DONNYFL adapter with the extension to help hold the liner for better harmonics.
I AM including the saber tactical bottle clamp and the standard 180cc tubes. No scope or bipod.
Cost if you were to buy:
Rifle-$350
Doux Hajimoto Power Plenum-$55
Doux Hajimoto Bottle Adapter Conversion-$115
DonnyFL barrel extender + moderator thread-$45
Saber tactical bottle clamp-$70
500cc aluminum bottle-$100
Modifications-costs money if you’re not savvy
—————————————————————————————————
Total: $735+tax+modifications
$500 shipped PP F&F or Zelle + signature required upon delivery
Considering the fact that the Avenge-X bottled models are upwards of $730+ and tax on top, I’d say it’s a pretty fairly price.
Shot count with it is ridiculous given it’s a 500cc bottle. I have not counted it…but it’s a lot at 45 F.P.E.! It feels like a Dreamline, except it’s cheaper than a dreamline while maintaining same performance.
I have also done modifications to the transfer port (made it bigger). Polished the barrel. Added power plenum + 500cc bottle (fill to 3625 PSI or 250 bar). Please note that although it is currently at 2200 PSI, the rifle is regulated up to 2900 PSI if you decide to push heavier projectiles. I highly recommend sticking to the 25.39s and shooting them faster if you want more power (like 970-990 FPS). If you want to shoot 18.1 grains, I recommend 935 FPS and just back the hammer spring all the way out to see where it’s at.
It has a DONNYFL adapter with the extension to help hold the liner for better harmonics.
I AM including the saber tactical bottle clamp and the standard 180cc tubes. No scope or bipod.
Cost if you were to buy:
Rifle-$350
Doux Hajimoto Power Plenum-$55
Doux Hajimoto Bottle Adapter Conversion-$115
DonnyFL barrel extender + moderator thread-$45
Saber tactical bottle clamp-$70
500cc aluminum bottle-$100
Modifications-costs money if you’re not savvy
—————————————————————————————————
Total: $735+tax+modifications
$500 shipped PP F&F or Zelle + signature required upon delivery
Considering the fact that the Avenge-X bottled models are upwards of $730+ and tax on top, I’d say it’s a pretty fairly price.
Last edited:
