FX Dreamlite .25 600mm
Second owner
Does not leak
O-rings replaced in AMP reg around 2021
Fx Power plenum
Comes with factory 250cc air tube (white gauge) and a lighter weight 220cc air tube (black gauge, installed)
Huma internal plenum, I never used it, came with 220cc tube
Huma Regulator gauge with better resolution
3 smaller Streamline mags, better with low scope rings
1 factory Dreamline mag
Homemade butt stock, better with low scope rings and Streamline mags
Factory butt stock
Fill probe
Huma 40/4 mod
Nearly full tin of 33.95 JSB
Misc 25g JSB, 20g H&N, Polymags
Factory box
I can remove the rubber grip gun tape, peels right off but makes picking up the gun much easier without a stock. If you are interested and don't want the grip tape. I can remove tape and send pics without it on.
Transfer port has been ported and pellet probe trimmed for better flow.
With 33.95 JSB's, hammer on "max" 939, 945, 944, 946 fps, app. 66 FPE
33.95 JSB ,hammer set at "B" 892, 888 fps for accuracy. It will shoot 25g too at lower hammer settings but I just stick with the heavies. It is FX accurate even at the higher FPS.
It will shoot the 20g H&N (included) at around 20 FPE if port and hammer turned to minimum to save air. These aren't JSB accurate but still fun to plink without using much air.
Only selling as I bought an FX Maverick
$800 shipped and double boxed with Huma. Or -$90 without the Huma mod, $710shipped
Second owner
Does not leak
O-rings replaced in AMP reg around 2021
Fx Power plenum
Comes with factory 250cc air tube (white gauge) and a lighter weight 220cc air tube (black gauge, installed)
Huma internal plenum, I never used it, came with 220cc tube
Huma Regulator gauge with better resolution
3 smaller Streamline mags, better with low scope rings
1 factory Dreamline mag
Homemade butt stock, better with low scope rings and Streamline mags
Factory butt stock
Fill probe
Huma 40/4 mod
Nearly full tin of 33.95 JSB
Misc 25g JSB, 20g H&N, Polymags
Factory box
I can remove the rubber grip gun tape, peels right off but makes picking up the gun much easier without a stock. If you are interested and don't want the grip tape. I can remove tape and send pics without it on.
Transfer port has been ported and pellet probe trimmed for better flow.
With 33.95 JSB's, hammer on "max" 939, 945, 944, 946 fps, app. 66 FPE
33.95 JSB ,hammer set at "B" 892, 888 fps for accuracy. It will shoot 25g too at lower hammer settings but I just stick with the heavies. It is FX accurate even at the higher FPS.
It will shoot the 20g H&N (included) at around 20 FPE if port and hammer turned to minimum to save air. These aren't JSB accurate but still fun to plink without using much air.
Only selling as I bought an FX Maverick
$800 shipped and double boxed with Huma. Or -$90 without the Huma mod, $710shipped
Last edited: