I'm selling this impact for a friend so when some decides to buy it or when it sells I'll have the person mail him the check and when it clears it will ship
M3 has tungsten hammer saber tactical front reg delete upgraded brass piston in reg with peek upgraded it to power block and installed a peek spacer in the plenum for first shot fix I have the rear reg washer stack set up for higher pressure I was able to sling 44 gr from the 25 cal slug barrel at 980 and had about 3/4 inch group NSA 44 gr slugs 800 mm 25 cal slug barrel and magazine 700 22 cal pellet barrel with probe and mag along with the 25 cal shrouds made by AZ i think this gun was used quite a bit but just got freshened up with new valve rod tunsten hammer orings power block which changes valve size also. 1300.00 shipped any questions feel free to ask thanks
M3 has tungsten hammer saber tactical front reg delete upgraded brass piston in reg with peek upgraded it to power block and installed a peek spacer in the plenum for first shot fix I have the rear reg washer stack set up for higher pressure I was able to sling 44 gr from the 25 cal slug barrel at 980 and had about 3/4 inch group NSA 44 gr slugs 800 mm 25 cal slug barrel and magazine 700 22 cal pellet barrel with probe and mag along with the 25 cal shrouds made by AZ i think this gun was used quite a bit but just got freshened up with new valve rod tunsten hammer orings power block which changes valve size also. 1300.00 shipped any questions feel free to ask thanks
Last edited: