EDGUN PEAZY

Jump to latest Follow Reply
LOKILUXURY

LOKILUXURY

Member
Oct 28, 2023
16
1
san jose, ca, usa
I recently purchased an Edgun Peazy with a 500cc bottle. i filled it up to 300 bar and when i tried to fill up my leshiy 2, it just leaks whenever i pull the peazy trigger. ive swapped out the fill probes and it still does not fill the gun because it just gushes air. i used the same probe to fill up the gun via my air compressor and it filled it just fine. any idea what the issue is?
 
LOKILUXURY said:
I recently purchased an Edgun Peazy with a 500cc bottle. i filled it up to 300 bar and when i tried to fill up my leshiy 2, it just leaks whenever i pull the peazy trigger. ive swapped out the fill probes and it still does not fill the gun because it just gushes air. i used the same probe to fill up the gun via my air compressor and it filled it just fine. any idea what the issue is?
Click to expand...
Here are 2 install/adjustment videos that may help:



I don't own the Peazy, but I do own the EZfill which does require an occasional adjustment.
 
  • Like
Reactions: woogie_man
Upvote 0
LOKILUXURY said:
I recently purchased an Edgun Peazy with a 500cc bottle. i filled it up to 300 bar and when i tried to fill up my leshiy 2, it just leaks whenever i pull the peazy trigger. ive swapped out the fill probes and it still does not fill the gun because it just gushes air. i used the same probe to fill up the gun via my air compressor and it filled it just fine. any idea what the issue is?
Click to expand...

Did it come fully assembled?
 
Upvote 0
Max pressure is 300 bar ..if your tank is filled to 4500 psi/310 bar ..it's going to leak
is the air coming from the brass disk on the bottom?
This is a bad design...max pressure should have been higher in order to fill a tank to 300 bar.
don't know if the burst disk can be replaced or adjusted to accomodate the higher pressure
 
Last edited:
Upvote 1
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu