i finally got the notos i just bought, but im running into a issue where it will not fill now, it almost sounds like its leaking out of the fill probe or the female quick connect fitting. i tried talking to pyramydair who i bought it through and they are telling me to basically trim the fill probe on the notos(i just bought this, im not trimming anything). i kept pushing the male fill prob into the female with my hands and somehow got it to about 1k psi, or so the gauge says, but after another 300 or so pumps its still at 1k and not budging.
Umarex notos not filling
- Thread starter Ehvan
- Start date
There is a box in the upper right corner that you can use to get information that has been posted before,it is like a google .Write in filling notos,this may give you some insight to help solve your problem,I have had the same problems before,one I had to cock the pistol beforehand, the other was the valve was stuck,Good luck
Upvote 0
i did dig through some of those, i tired the cocking to no avail. alot of the other stuff involved taking pieces apart, and as its brand new out of the box i dont really wanna get into stuff that could void the warranty
Upvote 0
i have no idea, it seems like it fits pretty snug in there. this is my first pcp and i have no idea what im doing yet lol kinda thought everything would work outta the box
Upvote 0
i swear on the life of me its the female quick connect, almost like the probe isnt seating on the oring inside of the fitting, like under the little ball bearings. but the guy at pyramydair swore up and down that wasnt the case. the probe has play in it when its in the fitting, and i "think" me pushing the probe hard into the fitting while someone else pumped was what got the 1k into the tank in the first place
Upvote 0
itll be too dark before i can get back at it, but i see the gauge on the pump go up then down, and right where the probe meets the quick connect i hear hissing
Upvote 0
It’s possible it’s the qd not all are created equal unfortunately. The knurled collar won’t engage the probe 100%?
Upvote 0
it seems like its engaged fully..the only thing i notice is it moves up and down maybe a centimeter or so. and when i push down on the probe it feels like it seats properly
Upvote 0