Just got this E Mail.
I was hoping for more than 44 fpe.
I was hoping for more than 44 fpe.
For myself I am looking forward to what the "Long" version brings to the table. I rarely go hunting in wodded areas, so the length would not be a problem. I like it being in the 6lb weight area however. My Airacuda is over 7 bare.This model is looking a little more compact than the gen 1. That's more up my alley. I hate musket sized rifles.
My revere is just over 40 inches with the belita on the front. Normally that'd be a deal breaker for me, but the weight on the rifle is balanced to the rear and it's slender enough to mitigate that twitch to my OCD .For myself I am looking forward to what the "Long" version brings to the table. I rarely go hunting in wodded areas, so the length would not be a problem. I like it being in the 6lb weight area however. My Airacuda is over 7 bare.
That makes sense. Those yotes don't sit still for long and you need perfect aim, especially with an air rifle.Other than just carrying it to a Hunting spot, I don't worry that much. All I hunt is Coyotes so I am normally seated and Calling and using shootin sticks. Weight does get to you after a while though. First Rifle I bought was a Savage 12FV with a Bull Barrel! LOL I then went to a Tika T3 lite! lol But when Hunting coyotes rarely do you get an off hand shot. Only if it's a Coyote of opportunity. At least in My experience.
My revere is just over 40 inches with the belita on the front. Normally that'd be a deal breaker for me, but the weight on the rifle is balanced to the rear and it's slender enough to mitigate that twitch to my OCD .
Now when I had a kral mega, that thing was so front heavy because of the tube, I just couldn't do it. I had a shoulder injury at the time and off hand shooting was almost impossible. Even when I switched it out to the np03 tube which is about 8 inches shorter, it was still too front heavy. That tube was aluminum, but it was the heaviest aluminum I've ever handled. I swear it was heavier than the 330cc rifle tube that's steel.
My .22 cal genesis model with its short 17” barrel will do around 40fpe after turning the reg up a quarter turn.. I can’t say what psi or bar the reg is at since there’s no gauge on mine but with that being said the .25 model should in theory easily push 60fpe with just hammer spring adjustment and possibly regulator pressure increase
I just like ripping things apart and making them better than they were,check picture this was once a simple akelaOCD ?? naw youre just mental
Tricked out. I like the Akela. One of my local buddies has one.View attachment 481380
Check that custom carbon fiber shroud lol