Something you might want to notice, if you like me get a .177 / 4.5 mm CUZ there are no choice in slug size in this caliber.
My CZ barrel like Zan and NSA slugs very much, probably also JSB KO, H&N ( 16gr ) absolutely NOT liking those.
Upvote 0
Epic Epic two?
- Thread starter Airgun Nation
- Start date
My CZ barrel like Zan and NSA slugs very much, probably also JSB KO, H&N ( 16gr ) absolutely NOT liking those.
I must say that to me this one of the best looking guns to recently come out. I like the look of the Evo as well it's just that the Epic Two has a sleeker look with very nice lines. But of course that is always secondary to accuracy and ergonomics.
Having said all that, I am very interested in seeing some video from Ranjur1. I've always shot .25 so would like to see how it shoots since most of the reviews I've seen are for .22, (am I missing something here? Is .22 better to go than .25?
One thing I don't think I like is having to break the gun down to change valve jets, but it's not always about sheer power so the jet that they ship with is probably good for most needs?
Having said all that, I am very interested in seeing some video from Ranjur1. I've always shot .25 so would like to see how it shoots since most of the reviews I've seen are for .22, (am I missing something here? Is .22 better to go than .25?
One thing I don't think I like is having to break the gun down to change valve jets, but it's not always about sheer power so the jet that they ship with is probably good for most needs?
Upvote 0
Yes, I'd also like to know what diameters each barrel like...but that might be a highly guarded secret ir you are going for competition
Upvote 0
I dont think you have to mess with the jet.
The assisted valve, well at least on a long rifle like mine, if you screw it in a little, then yes it will close faster and behave like you will not want.
Same go if you adjust it a little more out so it is open longer, even in the long version like mine, though in larger calibers that might be different, but i also see unwanted behaviour then and waste air.
So in my long pea shooter case, the valve need to be flush with the end, or be very minimal from that, though i dont think i would be able to tell the difference then.
But we are talking mm here, and only a couple of them at the MAX
A few 1/10 of a mm either way i dont think i would register, but a mm or a little more either way that i do feel.
The assisted valve, well at least on a long rifle like mine, if you screw it in a little, then yes it will close faster and behave like you will not want.
Same go if you adjust it a little more out so it is open longer, even in the long version like mine, though in larger calibers that might be different, but i also see unwanted behaviour then and waste air.
So in my long pea shooter case, the valve need to be flush with the end, or be very minimal from that, though i dont think i would be able to tell the difference then.
But we are talking mm here, and only a couple of them at the MAX
A few 1/10 of a mm either way i dont think i would register, but a mm or a little more either way that i do feel.
Upvote 0
The only major complaint about Epic Airguns is that they did not make more accessible valves like, say, FX Airguns, they would be easier to adjust, disassemble, etc.
Upvote 0