Airgun Technologies Strong leak Uragan 2

Jump to latest Follow Reply
U

Urbina

Member
Aug 7, 2024
1
0
Hello everyone...

I've had my Uragan 2 for a few months, and everything was going excellent.

But about four weeks ago, air started leaking out of the barrel, slowly, I fired a few shots and it stopped.

But last weekend, I found the tank empty. and when trying to fill it, the leak through the barrel was so strong that it was not possible to raise the pressure in the tank, even when cocking. Any idea what I need to repair or replace? Has anyone else had the same problem?
 
Urbina said:
Hello everyone...

I've had my Uragan 2 for a few months, and everything was going excellent.

But about four weeks ago, air started leaking out of the barrel, slowly, I fired a few shots and it stopped.

But last weekend, I found the tank empty. and when trying to fill it, the leak through the barrel was so strong that it was not possible to raise the pressure in the tank, even when cocking. Any idea what I need to repair or replace? Has anyone else had the same problem?
Click to expand...
Its the small o-ring in the block sometimes even the one on side of tran port
 
  • Like
Reactions: Urbina
Upvote 0
My Uragan 2 lasted a few months before balanced valve went bad. No leak thru barrel, just started alternating between full power and squib shots. Returned to Krale under warranty where original style balanced valve was replaced with an AGT re-design, no problems since. Unable to fill and leaking thru barrel was caused by broken valve (pictured) in my JTS Airacuda Max, wouldn't be surprised your valve is culprit, as well. WM
IMG_20240226_144632.jpg
 
  • Like
Reactions: Urbina, maxtrouble and Dairyboy
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu