Hello all. Looking for some help with thr crosman 2210 co2 repeater pistol. It was leaking so I disassembled and changed out seals but I have two tiny springs that I am not sure of their location. I have an old drawing of parts but it isn’t that clear. Any help would be appreciated. These are small coiled springs. I thing one goes by the trigger, perhaps behind it and one may go by the hammer. When I assembled it, it fired and held co2 really well but wasn’t cocking right or advancing correctly.
Crosman Crosman 2210
- Thread starter Mathguy24
- Start date
That is the best diagram available.
It shows all of the springs and where they fit. If you cannot repair your pistol with it then take your pistol and diagram to a professional.
It shows all of the springs and where they fit. If you cannot repair your pistol with it then take your pistol and diagram to a professional.
Upvote 0
sorry , but next time take pictures and use small bowls for say trigger parts in one bowl . This is the only way i take guns apart .
Upvote 0
You’re the man! The diagram helped me figure it out. The tricky part was getting the hammer in place. I reassembled it and it works better than ever. Thanks so much.
Upvote 0