EDgun Leshiy 2 9mm disassembly - need help putting a part back

Jump to latest Follow Reply
A

airn

Member
Aug 13, 2024
3
0
If anyone has access to a Leshiy 2 Workmat, I believe I'm working on the "forward plug" portion of the Leshiy. I attempted to follow Edgun West's Leshiy 2 Indexing Problems video, but an unexpected part (looks like the video wasn't shot for the 9mm) threw me off.

It's the tiny black cap. Where the hell does that thing go? I could really use a schematic or a photo of the forward plug assembly.

parts.jpg
unnamed.jpg
 
Did you receive it like that? They don’t just not index for no reason. Did you disassemble it as soon as you got it ? It’s usually not the internal parts that are the issue normally

Make sure your pellets are seated

Make sure your barrel is in the most front position, loosen grub screws and push the barrel in and tighten grub screws

Make sure you have trigger free play
 
  • Like
Reactions: coastal drifter
Upvote 0
PasadenaMike said:
Somehow it is that the low-quality products that fell under sanctions and continue to be sold in the USA, having only changed the name and legal address! Is that clear? This is the section on spring pneumatics, what does this garage creativity have to do with it, and especially PСP?The user has 2!!! messages!! He could be anyone.

Kinda inappropriate and disrespectful.
Click to expand...
 
Last edited:
Upvote 0
Whenever I had indexing issues it was usually the magazine plate that's either bent or scratched. I highly advise trying out at least a few fixes. It helps you to understand the gun better, and prevents having to send it back to EdGun every time a problem occurs.

Does it happen with all the magazines, or just one of them? You could dry fire it (make sure to take out the red transfer port first!) and see if the indexing cog turns or not. If it does, it's most most likely just the mag.

Also check if the barrel alignment. It has to be snug against the receiver block. If it sticks out even just a milimeter it can cause cycling issues.
 
Last edited:
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu