Huben .25 Slugs for GK1?

Bob's boattail slugs. Molds for these can be picked up from NOE bullet molds.

IMG_6988.jpeg
 
  • Like
Reactions: grouch-o
Anyone find any .25 slugs that work with the GK1? I have tried NSA and ZAN thus far and neither will work. They fit too loose in the magazine and are causing it to jam and not cycle correctly. Just wondering if anyone has found a good slug that seats well in the magazine and still shoots decent?

If so, please post the Brand and Weight of the slugs you've found that work. Also, what velocity have you found gives the best accuracy?

Thanks...
AVS makes the .254 that fit the mag. but the 42gr I tryed were not very accurate, at least in my gun.
 
  • Like
Reactions: Barri_40
  • Like
Reactions: rootdude
Why slugs in the GK1?
I’m genuinely curious.
Pellets are super accurate and never cause jams.
Pellets are accurate out to around 50 yards in the GK1 but slugs are more accurate at 50 yards and beyond. Also slugs are more lethal and therefore better and for pest control and hunting. Also if you have the right slug, it is actually more accurate than any pellets at any distance in the GK1 as the K1 and GK1 was primarily designed to shoot slugs.
 
Last edited by a moderator:
  • Like
Reactions: rootdude
Big BIG thumbs up here for @DMTman! I received a sample of his 50gr, 40gr (haven’t shot the 33gr yet) but can vouch that these are my favorite slugs I’ve run through all of my .25 (Lelya 2.0, Matador Long and GK1) - these are special in that I haven’t found a single slug yet that will run in all three cycling properly. I’ve tried ZAN, Altaros (good too in the GK but expensive), FX hybrids… but I prefer one slug to rule them all. I also prefer the heaviest slugs I can run in all my gear, and these fit the bill perfectly. Highly recommend you grab yourselves a sampler and send them downrange.

Peace,
Mark

P.S. they’re also very handsome.
 
  • Like
Reactions: JaceSpace1369
Anyone find any .25 slugs that work with the GK1? I have tried NSA and ZAN thus far and neither will work. They fit too loose in the magazine and are causing it to jam and not cycle correctly. Just wondering if anyone has found a good slug that seats well in the magazine and still shoots decent?

If so, please post the Brand and Weight of the slugs you've found that work. Also, what velocity have you found gives the best accuracy?

Thanks...
Zam now makes a .253
 
Big BIG thumbs up here for @DMTman! I received a sample of his 50gr, 40gr (haven’t shot the 33gr yet) but can vouch that these are my favorite slugs I’ve run through all of my .25 (Lelya 2.0, Matador Long and GK1) - these are special in that I haven’t found a single slug yet that will run in all three cycling properly. I’ve tried ZAN, Altaros (good too in the GK but expensive), FX hybrids… but I prefer one slug to rule them all. I also prefer the heaviest slugs I can run in all my gear, and these fit the bill perfectly. Highly recommend you grab yourselves a sampler and send them downrange.

Peace,
Mark

P.S. they’re also very handsome.
If you haven't tried them yet, the NSA .254 have worked the best in the K1 for me in the past.