Huben GK1 problem...

Mr.Brocock said:

I loaded my new GK1. Then, without flipping the "back" lever, i shot it. Now it is jammed
and dumping all air. Bummer, but my fault. Now what??

Thanks in advance

I should stick to my Brococks!!!

Click to expand...

rafr said:

If you bought it from Kelly, he usually sends a carbon push rod. Usually a pellet is stuck between the barrel breach and the magazine. You can gently tap the pellet back into the magazine with push rod. But be careful not to push the pellet back too far, you don't want the pellet to go out the back of the magazine. Keep the lever up so you can tell when the magazine is able to start rotating again.
Also you can call Kelly at Krazcool. He will walk you through the fix.
I have done this 3 times now. Got to remember to put that damn lever down. Lol.

Click to expand...

Carbon Fiber Rod 5mm x 1000mm - WIND CATCHER RC

CF Rod 5mm x 1000mm

windcatcherrc.com

Mr.Brocock said:

I loaded my new GK1. Then, without flipping the "back" lever, i shot it. Now it is jammed
and dumping all air. Bummer, but my fault. Now what??

Thanks in advance

I should stick to my Brococks!!!

Click to expand...

Mr.Brocock said:

Thanks Jace. I found the video and fixed it.
MikeVV, if you want to edit the title, go ahead. If not, go nit pick somewhere else, Karen....
Accurate..................Please.

Click to expand...