What did you do airgun related today.

This is a dream rifle.

HFT 500
Tuned close to 18fpe with JSB's heavy 10.34 at 870fps
Lothar Walther match barrel with carbon fiber sleeve.
Match trigger around 6 ounces
Updated Gehman butt pad
Custom hamster
Professionally adapted muzzle

Upgraded 300 bar air cylinder with quick fill probe and gauge

Huma regulator installed and extra gauge so now you can see both regulated pressure and tank pressure.

This rifle was tuned by Will Piatt to 18 fpe, one of a kind and accurate as just a professionally tuned rifle can be, .75inches at 55 yards.

75 shots per fill and 3 fps extreme spread.

Scope is Aztec Emerald 5.5-25x50

I can’t wait to get shooting

IMG_6349.jpeg
 
This is a dream rifle.

HFT 500
Tuned close to 18fpe with JSB's heavy 10.34 at 870fps
Lothar Walther match barrel with carbon fiber sleeve.
Match trigger around 6 ounces
Updated Gehman butt pad
Custom hamster
Professionally adapted muzzle

Upgraded 300 bar air cylinder with quick fill probe and gauge

Huma regulator installed and extra gauge so now you can see both regulated pressure and tank pressure.

This rifle was tuned by Will Piatt to 18 fpe, one of a kind and accurate as just a professionally tuned rifle can be, .75inches at 55 yards.

75 shots per fill and 3 fps extreme spread.

Scope is Aztec Emerald 5.5-25x50

I can’t wait to get shooting

View attachment 498178
Top shelf right there
 
I need a flat surface to mak contact with my bench rest.
I was using just the arca rail on it's own, but i found an inexpensive clamp to go on the Arca
I modified it slghtly..cut off the long stem for a nylon locking nut
The nut will act as a stop, and the contact with the rest is greatly improved.
would have liked the clamp to glide more on the front rest surface, but it is stable

IMG_0404.jpeg
IMG_0405.jpeg
 
Pathfinder XR…
Idk that I can justify that hahaha. I already have the notos covering the low power spectrum in .22, looking to get a compact .177 between the akela or xm1. If I sell the impact I'd want to replace it with another slug shooter in .30, or semi auto like gk1/k1
 
  • Like
Reactions: Bandito and L.Leon
Idk that I can justify that hahaha. I already have the notos covering the low power spectrum in .22, looking to get a compact .177 between the akela or xm1. If I sell the impact I'd want to replace it with another slug shooter in .30, or semi auto like gk1/k1
784 fps avg. with JSB 18.13s for 24.5 fpe… plenty of power…🙏
 
I finally got my Riding lawn mower running, after getting the engine and mower given back to me in a box full of parts from the service mechanic, I rebuilt the mower and engine, replaced all missing parts and finally after getting the last part in from UPS, I installed it and the engine fired right up and ran great, I guess I got it right....;) Mowed both front and back lawns and now I can see the pesky Critters in the grass, they won't get away now, I'll sick the Notos and the Avenger on them or any of the Other AG's I have ready......😈😁
 
I cleaned the barrel of my Atomic after finishing a tin of FX 15’s. I also turned the HS to shoot the next pellet up, H&N Terminator, to go 700 fps. I will lead in the barrel and see what preliminary accuracy they have tonight.

I also lubricated 3 tins with Pledge. They were washed and tumble over the weekend.
 
I put in a new more powerful IR flood light for my backyard. Since the camera exposes for the light received and adjusts it’s hard to tell, but it’s much brighter.

I also shot 68 more shots from my Notos.
And I washed 3 tins of pellets. Drying now in the Florida room.


looks to be a flying squirrel
 
Finished resealing my tech force 79, then cut the barrel 2" shorter and thread 1/2" unf for moderator. I bought this used and had so much issues, bent bolt, rusty barrel and bad crown. It was also marketed as a crosman 2240 when there was a BIG letters on the tube, Cold Hammered In North America ( CHINA ) lol. Now on to mods to raise the power up, only 6 fpe.