Has anyone converted their Kral NP03 to a carbon fiber bottle?
Any advice will be helpful.
Many thanks,
Matt
Any advice will be helpful.
Many thanks,
Matt
Kral Arms Convert Kral NP03 To Carbon Fiber Bottle
- Thread starter USAFANG6799
- Start date
Hi mat
I'm sure someone has done it.
But you will need all the parts from a bottle fed kral" so you may want to way up the cost first.
I put a longer air cylinder onto mine but it did make it quite abit heavier.
Being basically all the same platform it may pay you to just buy a bottle gun unless you really want the np03 on the bottle.
My np02 leaves the 03 in the shade in most departments except accuracy as I put in a walther barrel to accommodate the longer cylinder.
But otherwise the 02 is a great little gun with a massive shot count and still very accurate.
Hope this helps
I'm sure someone has done it.
But you will need all the parts from a bottle fed kral" so you may want to way up the cost first.
I put a longer air cylinder onto mine but it did make it quite abit heavier.
Being basically all the same platform it may pay you to just buy a bottle gun unless you really want the np03 on the bottle.
My np02 leaves the 03 in the shade in most departments except accuracy as I put in a walther barrel to accommodate the longer cylinder.
But otherwise the 02 is a great little gun with a massive shot count and still very accurate.
Hope this helps
Last edited:
Upvote 0
Many thanks for your candid advice.
Many of the points you made I've considered and you are right about cost of parts etc are valid points.
Its especially interesting that you installed a larger airtube which I did and yep it did up the weight a bit too much. I've made some of those 'safe queens' for that very reason.
The Kral NP03 was my first Kral and I really grew fond of it except for the meager shot counts hence the larger airtube. But it was a carbine.
I just installed a new Huma regulator because the first attempt quite frankly disappointing. New learning experience etc.
This second attempt was more enjoyable.The FPS looks more promising to work with. Surprisingly the accuracy makes me smile like it did on day one
from a couple years ago.
I do think I will follow your advice let it be and if I do hunger for another new PCP I'll consider the points you made.
Many thanks for your prompt reply and hope all is well.
Matt
Many of the points you made I've considered and you are right about cost of parts etc are valid points.
Its especially interesting that you installed a larger airtube which I did and yep it did up the weight a bit too much. I've made some of those 'safe queens' for that very reason.
The Kral NP03 was my first Kral and I really grew fond of it except for the meager shot counts hence the larger airtube. But it was a carbine.
I just installed a new Huma regulator because the first attempt quite frankly disappointing. New learning experience etc.
This second attempt was more enjoyable.The FPS looks more promising to work with. Surprisingly the accuracy makes me smile like it did on day one
from a couple years ago.
I do think I will follow your advice let it be and if I do hunger for another new PCP I'll consider the points you made.
Many thanks for your prompt reply and hope all is well.
Matt
Upvote 0
Hi mat
No problem
My very first thought when I got the 03 was to put a bottle onto it.
Why kral didn't is beyond me" I think they would of sold twice as many
But the parts in the uk are almost the same price as the gun itself.
Its definitely been done and does look smart.but an expensive talking point.
I'm sure it's the ekinoks parts that fit' but I should imagine most would if they've got the same breech block.
It's like the crosman pistol" its dirt cheap to buy but the amount of modded parts you can get will bankrupt you.
Hopefully you have changed poppet valve spring and got rid of the twang that the kral guns have
No problem
My very first thought when I got the 03 was to put a bottle onto it.
Why kral didn't is beyond me" I think they would of sold twice as many
But the parts in the uk are almost the same price as the gun itself.
Its definitely been done and does look smart.but an expensive talking point.
I'm sure it's the ekinoks parts that fit' but I should imagine most would if they've got the same breech block.
It's like the crosman pistol" its dirt cheap to buy but the amount of modded parts you can get will bankrupt you.
Hopefully you have changed poppet valve spring and got rid of the twang that the kral guns have
Upvote 0
Je suis dans la même configuration, avec un cylindre plus grand de kral puncher 230cc et canon de 58cm.
Changement du ressort de marteau, agrandissement des port transfert a 3,8/4mm.
Je trouve également que son poids est excessif, le cout pour le changement du réservoir, est pratiquement 2/3 du prix de la np-03.
www.forum-airguns.com
Changement du ressort de marteau, agrandissement des port transfert a 3,8/4mm.
Je trouve également que son poids est excessif, le cout pour le changement du réservoir, est pratiquement 2/3 du prix de la np-03.
kral - Passer la cap du pcp avec kral puncher np-03 4.5mm - Page 2
kral Merci à tous pour vos réponses cest top je vais publier une annonce avec quelques photos sur le furum vu quon est nombreux à être passionné peut-être qu
www.forum-airguns.com Upvote 0
Hello I have the NP-03 I was going to convert to a bottle but got caught up in the NOTOS and converted 3 to bottles with 1 in .177- 1 in .22 and the other in .25. I had purchased a bottle adapter from an online store. Image attached. I think they are around $150.00 or so shipped. Already equipped with regulator and very easy to install. Only requires minor stock modification to install. PM me if interested.
Upvote 0
Sorry type in WWW.OUTLETINN.COM. Type in KRAL CYLINDER REGULATOR in search bar. I have a new one I am not going to use. If interested PM me. Thank you
Upvote 0
The item comes complete as pictured - Valve- block- reg- fill port everything except carbon fiber bottle
Upvote 0
Great find rdpjr
Thank you for letting us know that this is available to buy.
I can see it on my 03 now lol
Many thanks
Thank you for letting us know that this is available to buy.
I can see it on my 03 now lol
Many thanks
Upvote 0
Guill it does unscrew and reg is adjustable. Bottle end unscrews and access to regulator, Like I said I bought it to convert my NP-03 and got caught up in modding the NOTOS I never used it. See attched images. Let me know if I can be of any further help.
Upvote 0
I like the looks of that also . I've tried to install a Huma reg in my NP-03 . Crapped up the job and now have a slow leak . I think a bottle conversion like the one
I did to my first generation Avenger should take care of the problem along w/ extra shots .
Upvote 0
All you need is a jumbo or dazzle drop block and a bottle. Cut the stock to fit.
This one had an altaros regulator and 350cc bottle. Np02 barrel, air stripper, and 3 baffles. Made it just quiet enough for backyard shooting, and had a 1/2 UNF for more.
This one had an altaros regulator and 350cc bottle. Np02 barrel, air stripper, and 3 baffles. Made it just quiet enough for backyard shooting, and had a 1/2 UNF for more.
Upvote 0