I normally remove a bit of material from the OD of muzzle end around 3/4". This removal of material is gradual in dia. A bit more material removal from the crown end and tapering it gradually.
Then I make bush having ID of reverse gradual tapering.
Then I push fit the bush on the muzzle end of the barrel and the barrel becomes choked and gives the desired results.
Please share how do you choke your barrels if needed.
Then I make bush having ID of reverse gradual tapering.
Then I push fit the bush on the muzzle end of the barrel and the barrel becomes choked and gives the desired results.
Please share how do you choke your barrels if needed.