A proper bench

Jump to latest Follow Reply
Michael

Michael

Administrator
Staff member
Mar 25, 2015
5,047
1
3,956
Dripping Springs, Texas, USA
airgunnation.com
While I really don’t enjoy shooting off of a bench, it can be a useful tool when testing different products and tunes.

For years I’ve shot off of a Lifetime (like Rubbermaid) portable table, then recently I purchased a Caldwell Stable Table. Both did ok for what they were, but I needed something less portable and sturdier.

I just bought this 2ft x 4ft bamboo and steel beast. It weighs about 50 lbs, is rated to hold 2000 lbs, is height adjustable, and has leveling caster feet. I haven’t shot off it yet, but I can tell that it’s not going to flex and change my POI from the slightest external input.

IMG_8457.jpeg


What kind of table have you found works best for you?
 
  • Like
Reactions: coastal drifter, rcarlisle, Joekrooz and 12 others
for outside I bought a caldwell shooting bench that came with a seat that was always too high or too low, so i drilled a hole in the concrete and mounted the table in the concrete and use my own stool. When i don't need the bench i pull it up and voila, free space. This I have the luxury of year round shooting, and from inside I’m somewhat stealthy when shooting a noisier Airgun
IMG_8420.jpeg

IMG_8419.jpeg

this is my inside set up.

IMG_7277.jpeg
 
Last edited:
  • Like
Reactions: Smitty911, coastal drifter, bustachip and 11 others
Upvote 0
Michael said:
While I really don’t enjoy shooting off of a bench, it can be a useful tool when testing different products and tunes.

For years I’ve shot off of a Lifetime (like Rubbermaid) portable table, then recently I purchased a Caldwell Stable Table. Both did ok for what they were, but I needed something less portable and sturdier.

I just bought this 2ft x 4ft bamboo and steel beast. It weighs about 50 lbs, is rated to hold 2000 lbs, is height adjustable, and has leveling caster feet. I haven’t shot off it yet, but I can tell that it’s not going to flex and change my POI from the slightest external input.

View attachment 510910

What kind of table have you found works best for you?
Click to expand...
caster will roll on the uneven ground, shifting when you apply weight . just a thought . Wonderful looking table
 
Last edited:
  • Like
Reactions: cavedweller
Upvote 0
I use 1" thick wooden table top ( kitchen counter ) for our benches, in the front end it is supported by a 4 X 4" beam horizontal mounted between 2 similar size beams.
In the back end there is 1 leg, also made of the same 4 X 4

Everything is under a roof and inside walls.
I still need to oil the bench tops, CUZ i think that will be the best thing to do, that will of course be burly Danish oil CUZ that's how we roll.

Will update with a fresh pic when i get home from the range some time Saturday.
 
Last edited:
  • Like
Reactions: rcarlisle, cavedweller and Michael
Upvote 0
beerthief said:
caster will roll on the uneven ground, shifting when you apply weight . just a thought . Wonderful looking table
Click to expand...
Maybe I used the wrong term. This bench came with heavy duty adjustable feet (I called them caster feet). I certainly wouldn't use anything with wheels! 😆
 
  • Like
Reactions: cavedweller and beerthief
Upvote 0
cavedweller said:
for outside I bought a caldwell shooting bench that came with a seat that was always too high or too low, so i drilled a hole in the concrete and mounted the table in the concrete and use my own stool. When i don't need the bench i pull it up and voila, free space.
this is my inside set up.
View attachment 510914
Click to expand...
Eliminating the attached chair was smart!
 
  • Like
Reactions: cavedweller
Upvote 0
The very best portable bench and even for a permanent setup is https://www.stukeysbenches.com/.
They are also the most expensive. When I purchased mine they were quite a bit less. Do not shy away, especially if you shoot expensive Airguns or powder burner, and already have a good air compressor, next get this bench. You will not be sorry.
 
  • Like
Reactions: cavedweller
Upvote 0
I bought a stainless steel restaurant kitchen table/stand. Has a lower shelf. I don't remember what I paid for it. I was looking for a solid microwave stand. It could'nt have been too much. I'm frugal by necessity,lol.I got it from Cosco I think. I leave it out year round. Ohio. I like the electrical outlets and the adjustable height on yours Mike.
 
Last edited:
  • Like
Reactions: Michael
Upvote 0
My home bench is my go to for dialing in scopes or testing various projectiles , both air gun and rimfire. I built the bench from plans readily available online and think it was one of my best investments. The first picture was at completion about 5 years ago . The second picture is today ( the blue tarp is a wonderful asset as a brass catcher when shooting my 10/22 ). A good shooting bench is a beautiful thing. Then:

KIMG1207.JPG




and now :

20241107_133916.jpg
 
  • Like
Reactions: JDR, rcarlisle, Gunnertrones and 10 others
Upvote 0
grackleblast said:
My home bench is my go to for dialing in scopes or testing various projectiles , both air gun and rimfire. I built the bench from plans readily available online and think it was one of my best investments. The first picture was at completion about 5 years ago . The second picture is today ( the blue tarp is a wonderful asset as a brass catcher when shooting my 10/22 ). A good shooting bench is a beautiful thing. Then:

View attachment 511003



and now :

View attachment 511004
Click to expand...
I really like this, and think I found the plans - they call for longer posts that get buried in the ground or cemented in place. I like that yours is moveable, if needed. Do you think you gave up anything on stability this way?
 
  • Like
Reactions: cavedweller
Upvote 0
AlanMcD said:
I really like this, and think I found the plans - they call for longer posts that get buried in the ground or cemented in place. I like that yours is moveable, if needed. Do you think you gave up anything on stability this way?
Click to expand...
Absolutely not. This bench is a monolith. It would take at least 2 or 3 people to move it. Chances are , that if I ever move from here , it will stay. :eek:
 
  • Like
Reactions: cavedweller
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu