Externally adjustable regs.

Jump to latest Follow Reply
Two ( Epic airguns ) have ready accessible regulator and hammer spring, it also have adjustable valve shut off but internally as part of the assisted valve, and really unless you get a short version it is not something you need to touch, and even so just 1 time.
And i am not even sure that go for all short ones, but SUb12 airgunner did find air savings by tweaking valve shut off, but on a sub 12 rifle.

The same is also the case with the new One model ( bullpup )

The Two is a damn fine rifle, more should buy one.
 
Last edited:
Upvote 0
Rti prophet, 1, 2, and 3.

20241014_155915.jpg
 
  • Like
Reactions: Spinach, Peashooter and Mike_Lenardon
Upvote 0
Mike_Lenardon said:
OK, which bullpups and carbines have an externally adjustable regulator. I don't care for FX so let's leave them out.
Air Maks Krait, I have one
Snowpeak M60b / Zellos, I'm thinking about one.
What else?
Click to expand...

The Zelos is your better bet for adjusting the reg DOWN.

It has a degassing grub on the left side of the receiver, just turn the air tube CCW three full turns, turn the degassing grub 1 full turn CCW, adjust the regulator down, tighten the grub, screw the tube back on and your done!

It's a 1 minute job with very little air loss.
 
  • Like
Reactions: Peashooter and Mike_Lenardon
Upvote 0
A plenum / regulator bleed, and so also reservoir cut off, that is also beginning to be must have setup in my book, even if i have adjusted FX and other rifles down under pressure for a long time, and have yet to in that way ruin a regulator.

But it just make so much sense to be able to bleed plenum, the question if if unscrewing air reservoir to halt re pressurization is the way to go VS say a toggle switch like old school transfer port adjusters, so just ON / OFF the air tank.
 
  • Like
Reactions: Firewalker
Upvote 0
Peashooter said:
A plenum bleed, and so also reservoir cut off, that is also beginning to be must have setup in my book, even if i have adjusted FX and other rifles down under pressure for a long time, and have yet to in that way ruin a regulator.

But it just make so much sense to be able to bleed plenum, the question if if unscrewing air reservoir to halt re pressurization is the way to go VS say a toggle switch like old school transfer port adjusters, so just ON / OFF the air tank.
Click to expand...

The Zelos is really quick, I see your point of a switch in no tools needed but that would take some engineering.
 
Upvote 0
Yeah also not quite sure if you can make a " switch " / valve, that can be easy turned while having a 250 / 300 bar pressure on one side of it.
In regard to real estate on the main body of a rifle i would assume it would take up very little room.

I am imaging sort of a lever like you / we know from a range of rifles air and PB safety , that would be so cool.

I am not at all familiar with the Zelos, but it seem like people are having a ball with them. So i have contemplated a Zelos pistol as i would like to get a pistol.
 
  • Wow
Reactions: Firewalker
Upvote 0
Peashooter said:
Yeah also not quite sure if you can make a " switch " / valve, that can be easy turned while having a 250 / 300 bar pressure on one side of it.
In regard to real estate on the main body of a rifle i would assume it would take up very little room.

I am imaging sort of a lever like you / we know from a range of rifles air and PB safety , that would be so cool.

I am not at all familiar with the Zelos, but it seem like people are having a ball with them. So i have contemplated a Zelos pistol as i would like to get a pistol.
Click to expand...

I don't know how that would be possible?
 
Upvote 0
Goodfast08 said:
Has external reg been confirmed? I haven't followed the updates for a couple weeks.
Click to expand...
When the Ninja regs became hard to get .. JSAR went about designing and building a Reg within the drop block.
URAGAN 3 has the Reg adjuster on the forward area of receiver above the bottle mount.
 
  • Like
Reactions: Goodfast08
Upvote 0
rscottar said:
Can the Kama EQ be purchased in US?
Click to expand...
You can't buy it anywhere currently. DonnyFL and the pelletshop will be the first ones to have it when it lands state side. Donny just put up the pre orders for the SLS, should be shipping next week to customers, the EQ will be soon after in December. You can pre order the EQ if you reach out.
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu