FX Impact M3 Question??

Jump to latest Follow Reply
Floridaman2005 said:
I believe I’ve heard not to turn the regs passed 170. I think 170 on the rear reg would be close to the upper limits. And that would shoot just about any slug over 1000+ fps out of a 600mm barrel. Mine is 500mm and shooting 18 grain over 900 fps on 85 bar rear reg.
Click to expand...
Pretty sure a stock impact won’t work well on a 170 bar. Pretty sure up there you need internal mods.
 
Upvote 0
Assuming you have the correct weight stock 25Cal hammer weight; I think you would max out on hammer strike around 140Bar.

My MK2 has a slightly heavier Huma weight and spring and I can probably go up to about 160-165Bar. But like was mentioned above you cant really run that high on a stock M3 anyway. FX says the Gen 1 AMP regs should not be set higher than 150-180Bar which includes the front reg. (Depends on what literature and which pcp you reference)
 
  • Like
Reactions: Trucker3573
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu