LCS SK19 TRIGGER MECHANISM PARTS

shooter75 · Saturday at 9:10 AM

Does anyone know if they sell a rebuild kit or if you can still by a trigger kit for the SK 19. I need one of the tension springs that go inside
the trigger mechanism and with LCS being out of business i don't even know where to start. Thank you in advance for any help. I will attach pics.

View attachment 515050

Arkansas_Airgunner · Saturday at 7:21 PM

Possibly try reaching out to Western Airguns.....worth a shot. No pun intended. Lol.....I have a SK-19 in .25 as well.

FelixS · Saturday at 10:08 PM

Maybe try DFL

GeneT · Sunday at 5:51 AM

You can readily make that spring with a bit of music wire (from a hardware store, not really musical...). Lots of good tutorials on springmaking online, so I won't attempt to write one here. Don't hesitate to try it - it's not hard and I have homemade springs in service that have been working fine for many years.

GsT

sb327 · Sunday at 5:58 AM

Gene is correct, that is a very easy shape of spring to make. All you need is to know the wire diameter.

Dave

shooter75 · Sunday at 9:28 AM

GeneT said:
You can readily make that spring with a bit of music wire (from a hardware store, not really musical...). Lots of good tutorials on springmaking online, so I won't attempt to write one here. Don't hesitate to try it - it's not hard and I have homemade springs in service that have been working fine for many years.

GsT

Thank you very much. This is a good starting point. I will give it a shot and post the results.

sb327 · Sunday at 11:59 AM

Once the spring is bent/wound to shape, toss it in the oven at 450degrees for 1/2 an hour. It will last you fine.

Good luck,
Dave

Search

Search

LCS SK19 TRIGGER MECHANISM PARTS

shooter75

Member

Arkansas_Airgunner

Member

FelixS

Member

GeneT

Member

sb327

Member

shooter75

Member

sb327

Member