I have a ½ Liter, 300 BAR Aluminum Bottle from an old Gauntlet I no longer have and was wondering if it could be made into a small fill station for use with my Notos and Jet airguns?
It has an inline regulator that is currently set at 2200 psi. Can the Belleville washers or spring (I don't recall which is installed) be removed so the the pressure leaving is the same as in the tank?
I have a Ninja Valve that is rated to 4500 psi, a short fill whip and an AliExpress knock off Eazy Fill I can attach to it that will bleed off pressure after filling the gun. I'm just curious if I can adapt this to that purpose, or do I need a different part to replace the regulator? Thanks for the help.
It has an inline regulator that is currently set at 2200 psi. Can the Belleville washers or spring (I don't recall which is installed) be removed so the the pressure leaving is the same as in the tank?
I have a Ninja Valve that is rated to 4500 psi, a short fill whip and an AliExpress knock off Eazy Fill I can attach to it that will bleed off pressure after filling the gun. I'm just curious if I can adapt this to that purpose, or do I need a different part to replace the regulator? Thanks for the help.
