Umarex Purchased a Zelos looking for mods

Jump to latest Follow Reply
Mjhiggs16

Mjhiggs16

Member
Nov 19, 2024
24
10
I have seen the other posts but a bit confused. I would love to find the cheapest most effective mod to quit it down if that’s baffles or any type of moderator and you have a product please post it here. Also mags. I would like to upgrade to a bottle but I’m not going to bother if I can’t find a 4500 regulator/adapter. If I am missing something please let me know. I have been shooting at about 2500 at 905 with 25.39gr and get about exactly a mag worth out and it’s time too fill. It’s worth it for how accurate it is. First PCP gun and Love it! 75yrd on the target smashing the red

IMG_8907.png



IMG_8906.png
 
  • Like
  • Love
Reactions: Ranchibi, JaceSpace1369, Mr.H and 2 others
nobody1 said:
The raw stub comming out of the receiver is M16x1.5.

Are you saying that you need to remove the stub piece and then you get to an M18x1.5 female thread?
Click to expand...
No, the raw silver piece has the m16x1.5 male threads. The adapter with the foster and gauge has an m18x1.5 male stubborn for the bottle to mount on.

So that's male m16x1.5 to adapter, m18x1.5 male to bottle.
 
Upvote 0
nobody1 said:
So we need a M16x1.5 female to M18x1.5 male adapter.
Click to expand...
Which is exactly what's on the gun already. To change that section over to a regulator, you'd need a regulator with the m16x1.5 female on the output side, and an m18x1.5 male on the input/bottle side.

I can't find one when I search online.
 
Upvote 0
Dr. Kralenstein said:
Which is exactly what's on the gun already. To change that section over to a regulator, you'd need a regulator with the m16x1.5 female on the output side, and an m18x1.5 male on the input/bottle side.

I can't find one when I search online.
Click to expand...
If we connect the air bottle to the gun and no regulator then there is no fill nipple.
 
Upvote 0
nobody1 said:
If we connect the air bottle to the gun and no regulator then there is no fill nipple.
Click to expand...
Exactly. So the option as it sits, is to get the adapter or the altaros regulator. The altaros is m18x1.5 female and male, so no need for an adapter between. Then you add a bottle, and it's going to get a little long. Maybe the zelos won't look too bad because it's already 4 inches longer than the m60b, but I personally think it'll look goofy with all those parts between bottle and receiver.

The altaros already has a gauge and fill nipple also. If a short M16x1.5 to m18x1.5 adapter exists, that would be the way to go IMO.
 
  • Like
Reactions: Mjhiggs16
Upvote 0
Dr. Kralenstein said:
Well here is one, but I don't know the pressure rating.

View attachment 515131

Doesn't appear to have any o-ring grooves either. The bottle has the groove in the neck, so that side would seal. Dunno about the m16x1.5 side.
Click to expand...
It seems like the $40 + shippting adapter from AirgunArcheryFun.ca is the only option.
 
  • Like
Reactions: Dr. Kralenstein and Mjhiggs16
Upvote 0
www.facebook.com

Alien Airguns And Bargains

Alien Airguns And Bargains. 999 likes · 132 talking about this. Air-gunsmith services, parts and barrels, made for the Air Venturi Avenger, Avenge X and other PCP airguns.
www.facebook.com www.facebook.com

This guy makes the part that terminater zelos 3d prints the fitting and sells for 200$. I think this part is about 60$ and you could 3d print it your self at that point
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu