Airforce raw hm1000X O-ring help

Jump to latest Follow Reply
rc4fun

rc4fun

Member
Oct 20, 2020
1,200
819
77
Owings, MD, United States
Can someone tell me if the BS007 exists in the current HM100X? It goes over the air bottle release pin (for lack of a better description). I removed my bottle and when reinstalled it leaks through the vent hole (blue). So either I lost the o-ring or something went bad. Looking for an answer before I go deeper than I need to.
Any one know where I can get some? I have the spare o-ring kit that came with the gun but nothing this size. I found a list from 4 years ago but the part #'s no longer match.
https://www.airgunnation.com/threads/raw-parts-list.617055/
Anyone have a current o-ring list? I hate to pay 36 + when I could get 50 or 100 each for that price.
Thank You, Kerry

1000x parts.JPG
 
by what your showing and Item I.D. see what you need as this:

( Non cast ) Poly in size 007 in 90 duro. I source ALL my o-rings from:
The O-ring Store LLC

As too the BLUE circle, that is the VENT for the space within body between the LP & HP ends of inner spool.
Leaks there indicates a BAD o-ring on the inner spool ( There are 2 having a small one on HP end and larger one on LP end. Replace BOTH (y)
 
Last edited:
  • Like
Reactions: mubhaur, Chasdog, woogie_man and 3 others
Upvote 1
Motorhead said:
by what your showing and Item I.D. see what you need as this:

( Non cast ) Poly in size 007 in 90 duro. I source ALL my o-rings from:
The O-ring Store LLC

As too the BLUE circle, that is the VENT for the space within body between the LP & HP ends of inner spool.
Leaks there indicates a BAD o-ring on the inner spool ( There are 2 having a small one on HP end and larger one on LP end. Replace BOTH (y)
Click to expand...
So sayeth the tuning guru! Make it so and get back to a happy day of shoot!
 
  • Like
Reactions: rc4fun, Chasdog and Ranchibi
Upvote 0
So unless you are doing lots of guns and if you really get enough 2 sets of rings from RAW you are better off going that way. If you get the minimum quantities from The O-Ring store it will cost around $80 but you will get a 100 of most and the Urethane ones you get 10.
I'm not sure the difference between Cast Urethane and non cast from the description of use the cast looks better?
I can not attach a picture so I'll attach a zipped .xls file for anyone interested in having the o-ring list

Well no attaching at this time I'll do it when fixed.
Screenshot 2024-12-15 150501.png


View attachment TMP.zip
 
Last edited:
  • Like
Reactions: Ranchibi and Chasdog
Upvote 0
rc4fun said:
Can someone tell me if the BS007 exists in the current HM100X? It goes over the air bottle release pin (for lack of a better description). I removed my bottle and when reinstalled it leaks through the vent hole (blue). So either I lost the o-ring or something went bad. Looking for an answer before I go deeper than I need to.
Any one know where I can get some? I have the spare o-ring kit that came with the gun but nothing this size. I found a list from 4 years ago but the part #'s no longer match.
https://www.airgunnation.com/threads/raw-parts-list.617055/
Anyone have a current o-ring list? I hate to pay 36 + when I could get 50 or 100 each for that price.
Thank You, Kerry

View attachment 520009
Click to expand...
FYI, that is NOT a RAW regulator in your picture. I can't upload a good pic, but what Scotchmo is saying is right on.
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu