Got my Daystate huntsman revere .25 a few weeks ago. It was and is not recommended in .25 on here but I bought before reading.I thought I was getting great deal for $900 but it was unregulated. It shot 30 20 gr pellets fine in my cellar range of 13 yards but started low at 796 and rose to 936 after 16 shots 170 BAR and fell to 863 125 BAR at shot 29. I don’t know what 50 yards would be but I suspect there would be a vertical path .
So tinkering I shall do, ordered a huma regulator and with much troubles finally got installed with no leaks. Kept the stock off and went to accurizing. Started at 150 on the huma and got consistent 890s but only 14 shots before dropping off.
Reduced to 140 on reg and saw no real change. Started playing with hammer , in the end back to what it was about.
So far and I’m not done but the only thing the regulator did was make the shots consistent from the first shot till about 15. Stock you could
get about 27 but the first 8 or nine were way low fps.
So tinkering I shall do, ordered a huma regulator and with much troubles finally got installed with no leaks. Kept the stock off and went to accurizing. Started at 150 on the huma and got consistent 890s but only 14 shots before dropping off.
Reduced to 140 on reg and saw no real change. Started playing with hammer , in the end back to what it was about.
So far and I’m not done but the only thing the regulator did was make the shots consistent from the first shot till about 15. Stock you could
get about 27 but the first 8 or nine were way low fps.