sorry, could you please explain to me what the difference is between a full shroud and the shroud/baffles that come with the Kratos in the first place?
Upvote 0
Tuning Would a tank enjoy a depinger, or only cylinders?
- Thread starter tegridy
- Start date
figuring out how to quiet down the action and cycling was next in my list. any suggestions? Besides getting an Alpha Wolf
Upvote 0
Interesting. I have an unopened can of black plastidip right next to me…I could try and always peel it off if it doesn’t work.
so if I understand correctly, your observation it that it may indeed have worked?
Upvote 0
Why the word "Typically" was chosen.
Yes those PCP's with Very Large plenums and said plenums configured in a tube ahead of valve sitting between regulator may also ping to some degree. The URAGAN 3 was one such PCP that was observed having this trait.
Very few PCP's have such large plenums that this ping is of concern ... IMO
Upvote 0
Plastic dip should be ok on metal bottles, but got to wonder if there could be some reaction on the carbon-epoxy bottles.
Upvote 0
LOL! The Alpha Wolf is pretty noisy IMO, it's very often the valve and spring itself that give rise to a noisy action, and this is further amplified by large plenum and further by bottles and cylinders.figuring out how to quiet down the action and cycling was next in my list. any suggestions? Besides getting an Alpha Wolf
Upvote 0
May have been quieter. The operative word is May. I cannot really say for sure. Hard to compare his .30 against my .22. Aluminum Bottle
Upvote 0
The full shroud gathers the blast of air from the shot and then lets it slowly escape through little holes in the bottom rear of the shroud.
It looks like the Kratos has a full shroud I should have checked that out before answering your question!
Upvote 0
As I make shrouds for all my guns none are STD, the quietest I have ever had was a BSA R10 with SSG and my shroud, and you could literally only hear the action and that was quiet.
Upvote 0