Unknown reciever
- Thread starter TnCnDn
- Start date
It definitely looks like it is for Crosman guns, potentially the 1377/1322 and related guns . . .
Upvote 0
Different generations. Craig explains here
My 1322 crosman is dead - Airguns & Guns Forum
My 1322 crosman is dead, Air guns, Airgun Forum
www.gatewaytoairguns.org
Upvote 0
Yes the screw is located under the bolt instead of were the pellet loads. This will work on the Discovery as well as 2240, 2250 and 2260 as long as you have the notched hammer. The 1322 and 1377 is the only model this won't work on because they do not have notched hammers other wise the hammer will hit the screw.
Upvote 0
Look at the pic, compare the screw fixing penetration and the transfer port. A recent 2240 is the same spacing as the 2213. Thanks for your input, much appreciated!
Upvote 0
No problem, Discovery and 22xx will have two threaded holes so you can use either style breech, I have both guns and both types of breeches. 13xx will only have one threaded hole and only accepts the more common forward mounting breech.
Upvote 0
it seems to be a Don Cothran breech
and Don put in a rear breech mounting hole on his tubes
and very few people made Stainless breeches
so, Don is closing up shop and the breeches are no longer made if it is that, it is a piece of 2240 history
https://cothranmachine.com/
and Don put in a rear breech mounting hole on his tubes
and very few people made Stainless breeches
so, Don is closing up shop and the breeches are no longer made if it is that, it is a piece of 2240 history
https://cothranmachine.com/
Upvote 0
What tube is that in the picture? This is a standard 2240 tube with mounting locations for both style breeches. The breech in the photo looks like a polished discovery breech or possibly and aftermarket breech like the other guy said. I have all 3 types of breeches and every main tube to compare.
Upvote 0
I got most of parts from eBay. Since Crosman sold out to Daisy everything is being made in China now and quality has gone downhill. Find old parts while you still can.
Upvote 0
2nd that. DAQ breechs came in both right and left side bolt configuration + set screw or threaded barrel retention methods.
Upvote 0
It was in a bag of misc. Crosman parts and it came in handy when I changed out plastic 2240 reciever thinking the Cothran reciever was the ticket. But much to my dismay... hence this post.
Upvote 0