Kral Arms Why did this take 9 years to think of?

Cut the front off the fill assembly. Used Birchwood Casey Aluminum Black to refinish. Then drilled and tapped for 1/8 BSPT. NO MORE PROBES

1000011973.jpg
 
Cut the front off the fill assembly. Used Birchwood Casey Aluminum Black to refinish. Then drilled and tapped for 1/8 BSPT. NO MORE PROBES

View attachment 540183
I’ve got a BSA Goldstar SE that could use some of that love, and a Brocock Atomic.
i frigging hate probes. One problem is they usually have a gauge where you put the QD.
 
I’ve got a BSA Goldstar SE that could use some of that love, and a Brocock Atomic.
i frigging hate probes. One problem is they usually have a gauge where you put the QD.
Only the a few Kral have the gauge in the front so you'd have to relocate that to the valve which isn't crazy difficult and would make it so much nicer than looking down the barrel while you fill.
 
  • Like
Reactions: RAMJET66