I am wondering if anyone else who owns a barra 250z has a bolt that does not have some sort of lock in the in battery position, In other words on mine after chambering a pellet if you were to turn the rifle upside down and then veriticle the bolt just falls open. Not good for a hunting rig. There is a small drilled divit in the bolt about 2" from the rear of the bolt that might suggest that a ball and spring detent might be missing from the bore that the bolt travels in, I've contacted barra but have not had any responce, any thoughts?
N/A barra 250z bolt
- Thread starter sfieg1234
- Start date
Back Roads (James) has a thread on the GTA airgun forum & has a bit of 250z use under his belt. If no response here I suggest give him a shout.
Upvote 0
I just tied to get mine to fall open by itself and it won't. It does not take much to open, but does stay shut.
Upvote 0
If you remove the rear pic rail there is a silver adjustment screw underneath that houses a spring loaded ball bearing. Turning it clockwise will increase the tension on the detent hole in the closed position. I recommend using some blue locktite once you have it set where you want. Mine tends to loosen over time and I will need to locktite the next time I adjust it.
Upvote 0
