Anybody have the TXEDM043?

I was a little surprised to see this compressor on Amazon https://www.amazon.com/gp/product/B0CYZWQDDH?smid=A39CP3T8JONR46&psc=1 .
I've been wanting to get a bigger compressor (currently have the GX4 and a couple of smaller portable ones) but definitely can't justify the price of a Bauer or similar brand. Has anyone here purchased one of these knockoffs and have any input good or bad?

711-V989rQL._AC_SL1500_.jpg
 
Tuxing is a good brand for me, I have been running a TXEDM042 for close to 2 years.

Never seen that one and that price is nuts.
It is a little more capable motor wise than the M042, but that means you need a dedicated 30 amp circuit. Standard 20 amp household circuit won't work. M042 will run on a 20 amp circuit.

Some nice features on the filter but I don't see anything that warrants $2K price tags.

My M042 will fill a 9L tank in ~75 minutes. I have a higher flow water pump and temp rarely rises above 130F.

There are more capable Tuxing 220V compressors for around $1200. Depending on model faster by 130% or more than my M042.
 
  • Like
Reactions: blackdog899
Tuxing is a good brand for me, I have been running a TXEDM042 for close to 2 years.

Never seen that one and that price is nuts.
It is a little more capable motor wise than the M042, but that means you need a dedicated 30 amp circuit. Standard 20 amp household circuit won't work. M042 will run on a 20 amp circuit.

Some nice features on the filter but I don't see anything that warrants $2K price tags.

My M042 will fill a 9L tank in ~75 minutes. I have a higher flow water pump and temp rarely rises above 130F.

There are more capable Tuxing 220V compressors for around $1200. Depending on model faster by 130% or more than my M042.
I'm looking at some of those other Tuxing compressors like you have. Honestly it's hard to tell the difference between most of the models. The model #'s are quite confusing. I'll have to see if I can find an accurate model comparison chart. I'd like to get something that will fill my 6.8l tanks quicker than my GX CS4. I'm also not a fan of the grease pot, would prefer a compressor that lubricates with a oil. 110v would be preferred, but could do a 220v if it is more efficient. I also fill my tanks to full 4500 psi, and am assuming these Tuxings will have no problem doing this consistently as I see the max pressure on these compressors is 4500 psi?