I shot my .51 Texan LSS connected to a 6.8 L bottle using a Alteros external regulator yesterday and walked away wishing I had tried this sooner.
Is anyone else shooting tethered?
Is anyone else shooting tethered?
Last edited:
Yes, whether I’m shooting long range, for accuracy, or tuning for max velocity with a perticular slug… I always shoot tethered. The only time I’m not tethered is when hunting.
What slugs are you slinging and what kind of accuracy & velocity are you getting?
Attached; 8” gong, 400 yards, 10 shots, 9 impacts… tethered.
View attachment 549214
View attachment 549215
All you will need is an external regulator.So…..
I have Big Bores, and I have 2 97 cu ft great white tanks.
I haven’t teathered before but this post has me wanting to do so on my Zeus.
What setup does one need to invest in to go teathered?
Here we are tuning a .72 cal Zeus. A high quality regulator, a couple of large air talks and my spreadsheet are all you that’s needed to start making one ragged hole. Note: The larger the caliber the more air you consume.So…..
I have Big Bores, and I have 2 97 cu ft great white tanks.
I haven’t teathered before but this post has me wanting to do so on my Zeus.
What setup does one need to invest in to go teathered?
Can you provide a link to the regulator yall are using?Here we are tuning a .72 cal Zeus. A high quality regulator, a couple of large air talks and my spreadsheet are all you that’s needed to start making one ragged hole. Note: The larger the caliber the more air you consume.
View attachment 549554
Can you provide a link to the regulator yall are using?
So all I have to do is set the regulator pressure for the rifle inline with the tank?
Sorry if I’m over simplifying, this is my first venture in this direction, normally I fill straight off the tank or worst case of my compressor
Thank you very much!
![]()
The reg will have both an in & out manometer. Hook everything up, open your tank valve and adjust your regulator (out) pressure to the BAR setting you desire. Super easy....
No probsThank you very much!
I’m shootings my rile at 319bar on the high end and run 3 large air tanks at 450bar, this allows me to keep one tank on the compressor while shooting. I’ve been considering the booster pump and may add it to my toolbox as a backup....also, if you plan on shooting anything >250 BAR you probably should go w the Alkin. The Alteros is limited to 250 which is as much I as I need ATM
There are probably other options out there as well but Alteros is very reasonable over on their retail site & it arrived quckly from CZ. Grabbed some slugs too to make the shipping opitmal
450 BAR is insane & must really get the job done!!!I’m shootings my rile at 319bar on the high end and run 3 large air tanks at 450bar, this allows me to keep one tank on the compressor while shooting. I’ve been considering the booster pump and may add it to my toolbox as a backup.
Ya my AirForce Texan may have a couple of small mods… lol.450 BAR is insane & must really get the job done!!!
Yeah, I think w the trend towards higher & higher operating pressures that the Alkin would be a good investment for anyone serious about the activity. Not just for big bore either
That Alkin looks seriously beefy compared to the mini that the Alteros is...definately a once in a lifetime investment.