This is the Bintac s45/357. With a 580cc front carbon fiber tank installed after purchase. Total air capacity is 830cc, now its enough air for 24 rounds per fill (finished at 250bar). Stock trim is 600cc 16 rounds per fill.
This is a blast to shoot ive put 150 rounds or so through it.
It's got two ebay 3d printed bottle clamp picatinny rails on the tank for 9 inches of continuous rail. (One I cut down to 4 " to make work) Optics factory angled grip fits without hanging off and leaves room for a small light / or bipod- tripod mount. Cheap paracord sling, feyachi v90 reflex.
It runs texoma precision 125 grain .356 slugs. Shoots in the 820s fps range and makes 185-190 lbs.
Issues: one small problem I caught was the screw holding down the clear cover on one magazine was a little too tight causing the wheel to get hung up in the last position, with no tension on the last round, it ejected itself out the back of the magazine. Just
loosened up the cover screw a touch and it's working fine now no issues no dragging.
It is definitely loud. I just received a texoma precision barrel extension tube to run a moderator, and just ran 3 magazines through it with the emperor .50 cal with zero cycling issues. It measures 34 inches overall muzzle break to shoulder rest. Or 44 inches with emperor moderator.
This is a blast to shoot ive put 150 rounds or so through it.
It's got two ebay 3d printed bottle clamp picatinny rails on the tank for 9 inches of continuous rail. (One I cut down to 4 " to make work) Optics factory angled grip fits without hanging off and leaves room for a small light / or bipod- tripod mount. Cheap paracord sling, feyachi v90 reflex.
It runs texoma precision 125 grain .356 slugs. Shoots in the 820s fps range and makes 185-190 lbs.
Issues: one small problem I caught was the screw holding down the clear cover on one magazine was a little too tight causing the wheel to get hung up in the last position, with no tension on the last round, it ejected itself out the back of the magazine. Just
loosened up the cover screw a touch and it's working fine now no issues no dragging.
It is definitely loud. I just received a texoma precision barrel extension tube to run a moderator, and just ran 3 magazines through it with the emperor .50 cal with zero cycling issues. It measures 34 inches overall muzzle break to shoulder rest. Or 44 inches with emperor moderator.
