Airgun Technologies Testing slugs with the VULCAN 3 HP .30

Jump to latest Follow Reply
shaman said:
If someone want to fit even 68 grain slugs in the magazine - just PM me..
I'll send you a .stl file for the magazine cover and you can print it :)
Click to expand...
thank you, i have gooten a file for that from another user here, but unfortunately did not manage to get access to a 3d-printer. ended up with using a mini grinder to make space on the underside of the mag lid and also put some wire underneath it, to lift it up a little. now it also works with 68gr slugs. (since it is on the underside, the uneven 'hatchet-job' is not visible.)
 
  • Like
Reactions: shaman
Upvote 0
shaman said:
If someone want to fit even 68 grain slugs in the magazine - just PM me..
I'll send you a .stl file for the magazine cover and you can print it :)

View attachment 531695
Click to expand...
I just got them made per your file. They are SWEET!
Thank You!

I had 4 made and printing only cost me 15 euros in total and the dude lives nearby. No more half measures like spacers and such and these work perfectly on my .25👍
 
  • Like
Reactions: JaceSpace1369 and grouch-o
Upvote 0
photo_5940318367896422677_y.jpg
photo_5938439749201151671_y.jpg

casted slugs for the first time. i've used a recommended NOE boattail and ended up with 66.6gr. they fit tightly, so cocking is a bit harder than usual, but i got much better results power-wise, but not i have to tune the gun properly for these. besides getting my ears ringing (supersonic!) i was surprised about the over 300J output of the V3HP. more testing/tuning needed.
photo_5942644955975632871_y.jpg
 
  • Like
Reactions: shaman
Upvote 0
shaman said:
If someone want to fit even 68 grain slugs in the magazine - just PM me..
I'll send you a .stl file for the magazine cover and you can print it :)

View attachment 531695
Click to expand...
Hi, hope all is well. Was interested in if you still offer the stl file for the Agt Vulcan .30 magazine mod .
If so can you please send at your convenience thanks
[email protected]
 
Upvote 0
BumperMan said:
Make sure your chronograph shows good results. I had one a few years ago and it worked properly only on .177 and .22 and every larger calibre gave incorrect readings. Of course, this does not mean that yours is also bad. Greetings
Click to expand...
thanks, i have no way to test it, so it might all be just glitches. got even higher numbers on a few shots recently...so maybe the chronograph is junk.
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu