This is the magazine holder I designed that replaces the left side side plate and uses the same screws. It is compatible with both the OEM magazines and the ones I designed.
Upvote 0
Snowpeak Artemis SPA P35/Bullshark Improved Magazines
- Thread starter Spike_9
- Start date
Here is my Pintypup setup. I mounted the Vortex Strike Eagle 4-20x50 with risers to compensate for the narrow cut rail, that took the extra slack out. I redesigned and made a new tri-picatinny rail that is 2.5" long and has no flex. I also made a port blocker for the shroud to keep from blowing air and lead dust into my face. I don't know why they do that....It makes it louder to my ears.
Last edited:
Upvote 0
Not yet. I am going to test the Appolo, HN and JSB slugs next week over the chrony. My slug experience with the P35, it does best when I tuned it to 900fps with the hn 16 grainers. I can consistantly hit golf balls at 80 yards with minimal drop. I am going try to achieve the same thing with the Pintypup. Slug wise, I have gotten better accurcy cutting a tappered chamber with a reamer. (Bob Stern had a great write up about it years ago.) I may try that if I can't get my Pinty to group slugs.
Upvote 0
