RTI Rti Mora 600mm 25 cal

Fodzy le Geek said:

Hello, I have your answer. Before, you had to turn the valve, but this is not the case on the new models.

You simply have to turn the barrel so that the transfer port openings are facing each other. It's even simpler than before.

Click to expand...

turbospud said:

found the issue,looks as if the importer has indeed put a part sub 12 tune on it.by turning the valve seat to the restrict side.
thanks droogmole and Rok for the help and suggestions

View attachment 530588

the valve train looks as if its been modified in the newer versions compared to your one droogmole

View attachment 530589

so quick retest and its in ballpark of where it should be,just need to work on the consitancy now.

mora 34g 140 bar reg

H&N Heavy Slug .22 Slug 34.0 gr

Shot count: 32
Low: 939
Hi: 967
Avg: 955
STD Dev: 8
Spread: 28

1/19/25 2:41:08 PM,963,FPS,70.0,FT Lbs,
1/19/25 2:41:23 PM,956,FPS,69.0,FT Lbs,
1/19/25 2:41:33 PM,963,FPS,70.0,FT Lbs,
1/19/25 2:41:44 PM,953,FPS,68.6,FT Lbs,
1/19/25 2:41:57 PM,960,FPS,69.6,FT Lbs,
1/19/25 2:42:13 PM,953,FPS,68.6,FT Lbs,
1/19/25 2:43:12 PM,965,FPS,70.3,FT Lbs,
1/19/25 2:43:28 PM,949,FPS,68.0,FT Lbs,
1/19/25 2:45:26 PM,946,FPS,67.6,FT Lbs,
1/19/25 2:45:44 PM,946,FPS,67.6,FT Lbs,
1/19/25 2:46:03 PM,956,FPS,69.0,FT Lbs,
1/19/25 2:46:23 PM,942,FPS,67.0,FT Lbs,
1/19/25 2:46:40 PM,963,FPS,70.0,FT Lbs,
1/19/25 2:47:36 PM,949,FPS,68.0,FT Lbs,
1/19/25 2:47:52 PM,963,FPS,70.0,FT Lbs,
1/19/25 2:48:07 PM,965,FPS,70.3,FT Lbs,
1/19/25 2:48:47 PM,967,FPS,70.7,FT Lbs,
1/19/25 2:49:24 PM,963,FPS,70.0,FT Lbs,
1/19/25 2:49:50 PM,951,FPS,68.3,FT Lbs,
1/19/25 2:50:12 PM,939,FPS,66.7,FT Lbs,
1/19/25 2:50:27 PM,963,FPS,70.0,FT Lbs,
1/19/25 2:50:45 PM,946,FPS,67.6,FT Lbs,
1/19/25 2:51:03 PM,965,FPS,70.3,FT Lbs,
1/19/25 2:51:21 PM,958,FPS,69.3,FT Lbs,
1/19/25 2:51:36 PM,960,FPS,69.6,FT Lbs,
1/19/25 2:51:48 PM,967,FPS,70.7,FT Lbs,
1/19/25 2:52:01 PM,953,FPS,68.6,FT Lbs,
1/19/25 2:56:21 PM,958,FPS,69.3,FT Lbs,
1/19/25 2:56:46 PM,949,FPS,68.0,FT Lbs,
1/19/25 2:57:03 PM,949,FPS,68.0,FT Lbs,
1/19/25 2:57:21 PM,944,FPS,67.3,FT Lbs,
1/19/25 2:57:39 PM,951,FPS,68.3,FT Lbs,

thanks for all the help droogmole and Rok, great to see the maker get involved and back their product.
just that i think Rok needs a new importer or better training for them
and the importer is due me 3 tins of slugs that ive waisted.

Click to expand...

faz said:

Hi guys I was wondering if you can put a supressor to the new rti mora as there is nothing to screw it onto and the new ones has a different front so im stuck with a hish supressor and cant even attach it .. do u need a adaptor..

Click to expand...