Gun cradle or gun cart and pics for ideas.

Here's a photo of the new Gen 3 Cuccio tote. Rick was going for the absolute lightest setup with this version. I heard he filled the tubing with helium for additional weight reduction.


You can see one of the hangers on the back side for carrying your bipod. The 'seat' is on a hinge so it swings out of the way for slipping the rifle in and out of the carrier.



I'll be adding a bicycle bottle holder to carry water and then it should be ready to go. I use a pouch for carrying my pellets.
This will replace my buggy for shorter matches.

davit66 said:

Here's a photo of the new Gen 3 Cussio tote. Rick was going for the absolute lightest setup with this version. I heard he filled the tubing with helium for additional weight reduction.

View attachment 555848
You can see one of the hangers on the back side for carrying your bipod. The 'seat' is on a hinge so it swings out of the way for slipping the rifle in and out of the carrier.


View attachment 555851
I'll be adding a bicycle bottle holder to carry water and then it should be ready to go. I use a pouch for carrying my pellets.
This will replace my buggy for shorter matches.

Click to expand...

Saweeeet! I like the first Cuccio so much i'm all in for a Gen 3! Of course a carbon fiber water bottle holder is a must.

I've completed my mods to the Gen 3 Cuccio tote by adding the bottle holder and a thin neoprene sheet to the seat area. I found the bare aluminum to be a little slippery and the neoprene keeps me planted on sloped terrain.
So here are a couple of photos of the tote loaded and ready to go. I'm amazed at how light and balanced this setup is to carry.

If you're interested in one of these, you can message Rick at 'rcuccio' here on AGN.










And here's a photo showing the proper way to carry this tote. You actually reach across to the far top rail and this tilts the legs away from your body. Very easy to carry this way. And no ropes or handles to get in the way.



One more point, when you place your order you specify the seat height you would like and Rick can make it to your liking.

davit66 said:

Here's a photo of the new Gen 3 Cuccio tote. Rick was going for the absolute lightest setup with this version. I heard he filled the tubing with helium for additional weight reduction.

View attachment 555848
You can see one of the hangers on the back side for carrying your bipod. The 'seat' is on a hinge so it swings out of the way for slipping the rifle in and out of the carrier.


View attachment 555851
I'll be adding a bicycle bottle holder to carry water and then it should be ready to go. I use a pouch for carrying my pellets.
This will replace my buggy for shorter matches.

Click to expand...

I like the wide footing .

davit66 said:

I've completed my mods to the Gen 3 Cuccio tote by adding the bottle holder and a thin neoprene sheet to the seat area. I found the bare aluminum to be a little slippery and the neoprene keeps me planted on sloped terrain.
So here are a couple of photos of the tote loaded and ready to go. I'm amazed at how light and balanced this setup is to carry.

If you're interested in one of these, you can message Rick at 'rcuccio' here on AGN.

View attachment 556537

View attachment 556538

View attachment 556539

View attachment 556540

Click to expand...

Are you attaching some rope handles to it?

Aimright said:

Are you attaching some rope handles to it?

Click to expand...

See above. I edited the post to show how to carry without ropes or handles.

Arm stretch / carry fatigue is not your friend !!! Keeping your body parts as relaxed as practical lane to lane ... priceless