GX CS4 Pressure Problem

Jump to latest Follow Reply
T

Trampus99

Member
Aug 22, 2022
175
171
Louisville Tn USA
I have had a CS4 for about a year and it has worked great, about 12 hrs on it. A month or so back I was filling a few guns and after the first one ( that filled fine ) I started another and everything looked and sounded fine but there was no pressure building? After turning it off and on several times it started building pressure fine? So now this has happened about 4 times. Sometimes just trying to fill a gun and sometimes trying to fill a second? Anyone experienced anything like this?

Thanks,
Chuck
 
Trampus99 said:
I have had a CS4 for about a year and it has worked great, about 12 hrs on it. A month or so back I was filling a few guns and after the first one ( that filled fine ) I started another and everything looked and sounded fine but there was no pressure building? After turning it off and on several times it started building pressure fine? So now this has happened about 4 times. Sometimes just trying to fill a gun and sometimes trying to fill a second? Anyone experienced anything like this?

Thanks,
Chuck
Click to expand...
Sounds like dirty check valve. Inspect and clean check valve under burst disk on top of compressor.
 
Upvote 0
Trampus99 said:
I have had a CS4 for about a year and it has worked great, about 12 hrs on it. A month or so back I was filling a few guns and after the first one ( that filled fine ) I started another and everything looked and sounded fine but there was no pressure building? After turning it off and on several times it started building pressure fine? So now this has happened about 4 times. Sometimes just trying to fill a gun and sometimes trying to fill a second? Anyone experienced anything like this?

Thanks,
Chuck
Click to expand...
A friend recently purchased a CS4-i and had similar problems right out of the box. GX advised him to test the compressor at 12 volts. He did, and it worked perfectly. The culprit was an out-of-spec power supply. It could be that, after a year, your power supply is failing. Try it at 12 volts.

JackHughs
 
Upvote 0
Video



1745257484226.png
 
Last edited:
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu