R

RM.510bigbore

Member 42 From Pennsylvania, United States
View Feedback Add Feedback
Messages
1,574
Solutions
1
Featured content
0
Reaction score
1,265
Level
1
Joined
Last seen
Follow
Start conversation

Profile posts Latest activity Postings Featured content About

  • R
    IMG_20250410_160723.jpg
    A Wild Turkey 🦃 enjoying the garden when the gate is open...
    Report Reply
    • Like
    Reactions: Pale_Rider
    Ezana4CE
    R
    Yes Pre-garden time...Gates open...Turkeys won't eat the Ryubarb so all is well... It is tough to get a plot statded with turkeys around they love digging through fresh tilled ground getting all seeds that you just planted.lol...I enjoy the turkeys, hopefully have 3-4 hens settings on Eggs this year...Big Texan thinned out 2 foxes this year..So turkeys otta to be happy...
    R
    Just got another carrier tube installed in my Texan .510.. Sun shining here in Pa.. Im going to shoot 200 yards again..Wish me luck..Ill post a few groups..
    Report Reply
    • Like
    Reactions: Pale_Rider
    Peashooter
    SO ? It was ypu that stole my sun, it just left Denmark in darkness.
    Fortunately tomorrow is a good day, i go to the range too even if the also have about .177 in perception in the hours around noon.
    R
    IMG_20250331_155419.jpgIMG_20250331_155338.jpg
    3 Good Shots at 200 Yards...There is one .510 N.O.E mold Hard Cast Wheel Weight lead in locast tree at 200 yards.. Could probably resize and shoot again...lol
    R
    Shooting 200 Yards on the New Range..I tried a double ball head tripod setup...I also shot off regular rest and bag...AHH CARRIER TUBE Screws stripped out again..I have to buy another one IMG_20250331_152153.jpgIMG_20250331_152023.jpg
    R
    IMG_20250217_170401~2.jpg
    My Big .510 Texan Got a paint job on My custom Free Barnett Crossbow Stock.. Got the carrier tube changed out .. Also had a wire separate on my Donny Fl Emperor causing accuracy problem s..I removed felt and screen and accuracy back.. Also cleaned barrel first time since hand lead lapping...
    R
    Yeah got my big .510 Texan fixed today!!!! Changed out the Aluminum carrier tube..Screws stripped out..Can't wait to get to my other property and shoot 200 yards or close too...In time all good things come together...
    R
    Reclaiming Pure Soft Lead today.. I went to the local scrap yard and bought 80 lbs of pure roofing lead in sheets or rolls..Today im going cut in pieces melt down in dutch oven and make ignots with a used muffin pan..with inflation Lead is now $100.00 for 80 lbs pure lead in my area.. IF anyone wants to learn how to reclaim lead for casting ill post pics... So 80lbs of lead will make alot of .224 high B.C Airgun slugs
    R
    Hand lead lapping and Air Lapping sucessful..My barrels are now shooting NSA slugs and .222 52 grain spire points...With slugs the bores need to be perfect smooth uniform.. I miss custom barrels like Benchmark Barrels...But when you have more time than money ..Lead lapping barrels a option..from our grandfathers generations...old school
    Report Reply
    • Like
    Reactions: manabeknives
    View previous comments…
    R
    In fire arms it is called fire lapping..In Airguns Air-lapping i guess..I fully clean my barrels and then take lapping compound and put on slugs..Shoot through your air rifle..It really does work on rough production grade barrels..You can start with 120 grit than 240 grit,and 340 grit to finish up..You have to fully clean inbetween different grits.. Im getting my best results hand lead lapping my barrels first and finish them up with air lapping.. David Tubb makes a proven fire lapping system for powder burners ..So yes it works if you dont have a real quality barrel than is lapped after reaming and again after rifleing.. I drilled and reamed 1000,s of production grade barrels that were rough....Know im learning to make them smooth and uniform... When i built and shot benchrest powder burners good barrels were cheap..I used to buy Benchmark 28inch stainless countered blanks for $230.00...
    Ezana4CE
    R
    Nice!!!!A factory Airforce 4500 psi super valve!!!! I want one to buy the valve and tank an upgrade my .510....I have 100 lbs of .510 650 grain spire point boat tails .5 B.C......Yeah!!!!!
    R
    Its been cold here. I been hand lead lapping barrels..Air lapping them after..Casting Slugs..And finally good results...A TESLONG Digital borescope is amazing!!!Best $25.00 i ever spent...I had a hawkeye borescope was a $1000.00 back in the day ..TESLONG much better..,Stay warm AGN Friends
    R
    Looking foward to the 2025 Airgun Season..Im slowly making progress and learning alot with my custom 12 twist condors and cast slugs..Its been difficult but most things worth doing are..I need to buy parts for my Texan .510 and she will be on the road again..I also am going to be putting a moderator on my Umarex Airsaber...I lucked into the parts..I think i can shoot without vaines and be accurate and quiet with easton 2219,s. Anyways happy new years much thank to the friends and support on AGN!!!!!
    Report Reply
    • Like
    Reactions: AmosBurton
    Ezana4CE
    How do you plan to shoot without vanes?
    Peashooter
    Forward indeed.
    I will however probably have to forget the RTI Mora, of let me rephrase, i hope there will be something nice a little cheaper.
    For instance a FX DRS classic 2.0 with easy to reach " knobs " to dial on.
    But i am open, also the plan really was to get a bullpup to replace the Maverick

    Also i wish Winter came with FF button, even if such a thing are dangerous to use at my age.
    R
    When playing around shooting 120 yards with the Airsaber I had a arrow with messed up fletchings so i cut them off and shot it.. To my suprise it was exactly the same right to left only about 3inchs higher than the ones with vaines.. Im going to test and see.. Without vaines will be much quiter...Smaller exit hole... Will see..Wont cost anything to moderate the Airsaber worth a try... To date my Airsaber is reliable has never broke...knock on wood lol
    R
    Ahhh My Big .510 Texan let me down last day in hunting shack.... Went to cock and both screws stripped out of aluminum carrier tube ..Was hoping to get cocked for one shot but no go...I guess in using the air saber today...Airguns definitely break... You always need a back up
    Report Reply
    • Sad
    Reactions: Treefrog
    Ezana4CE
    R
    No different issues from before..The screws just stripped out of carrier tube from use..I dont ever switch out barrels..I dont know if ill buy another airforce aluminum one or buy AOA steel one,,,it is $160.00 though.. I finished out the day hunting with the Airsaber..All in all this was the best hunting season i ever had.. The way i look at it now is my Texan shoots free cost me nothing ammo one once slugs in one hole at 50 yards.. Yes it defenitly breaks..Kinda like a 2 stroke motercycle...So i buy Airforce Texan parts and compressors compared to powder burners at $2.00 to $5.00 a shot.. Airguns work but there are no free rides
    R
    AHH Air Anxiety at hunting season as always..On like 10-12 pistons -rebuilds on yong heng.. I bought a GX CS4 compressor..It was within budget...I need to fill a SCOTT 5500 psi tank for my .510 Texan..Sometimes..I just want enough air to shoot my Custom Condors..Time will tell how good this chinese compressor is..To keep shooting PCP's i have to play the cheap compressor game..Wish me luck friends Good Day
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top Bottom
Back
Home
Forums
Resources
Menu