Search results for query: *

Leshiy classic, upper one failed, lower one new

And then there was the Anschütz Hakim Military Training Rifle, made for the Egyptian Army around 1954 - between 2500 and 2800 were made, I got two og those Anschütz air rifles (various)

Thank You very much, looks great! - and congrats with the new cylinder, are you interested in a Co2 adaptor if any offers comes my way or is that FAC like in DK?

Take a look at this thread and the video Ed posted at page 2 Leishy 2 wont cycle the mag ?

Better to post this in the Leshiy 2 thread, but anyway, the jets from factory should have been two 1.2 nozzles mine came as such and did 922 fps / 281 m/sec with same JSB 18.1 grain heavy's with the reg as came from factory, do not have a reg tester but seems to fall of reg at 120 bar

Compared to € 2.295,00 from edgunleshiy.shop spain its about half the price

Could have explained it better, my bad - not all 3D printers do small holes very well so I posted 3 models with different hole size, 1.80 - 1.90 and 2.00 mm Have updated the original post

Translated: You have to know that guns are prohibited in China.But guns are every man's dream again.In China, a man's dream of owning a gun can be fulfilled.What a happy thing that is.And my gun.Not as beautiful as you bought.My gun is diy by myself.Except for the barrel.The firing is not...

Same with the Leshiy 2, also a shoot though mag system, no biggie, did not keep me from buying a second and third one

Francisco Rambo

wait for it..wait for it :ROFLMAO:

May be the same in your country if you do a search, here in Denmark you can get a print of the size up to 18x18x18 cm for a fixed price of kr. 75 = 10 € 3D-Print Aarhus

This will take the strain of your wrist: Right hand holding grip Support the barrel against left leg inner thigh Left hand pulling lever

and you can flip the trigger weight to a PB setting of 1360g ...instead of a more normal airgun setting at 500 gram I love the feel of the recoil less shot cycle, expect an average of 130m/sec (427 fps) from new or with a new spring installed Edit: and JSB Exact 0,547g/8,44grain pellet...

BTW, someone posted the measurements of the valve pin ball

You did not state the caliber (I think), the dog collar and bone is in 4.5, 5.0 and 5.5mm only - and as I understand it, its a efficiency thing in the lower calibers only and I can attest it shoot and index just fine without it. the valve pin ball may have disintegrated over time, Comtruise...

Yes there might be some grit behind the clip You can check the head spacing with a slice of paper, 80g copy paper measures 0.1 mm, should easily slip down to the barrel end and puck on both sides of mag, rotate mag, check again When the reloading system works it works a 100 percent, I only...

Yes, and nobody explains it better than ED, here's some screenshots Simple and brilliant way to make a check valve IMHO, compare with FX's over engineered version (as in my cyclone, cutlas, monsoon, revolution) - all leaking because the o-ring goes flat over time - while filling the Fx's I...