Search results for query: *

  1. bearbar

    PCP Rifle Want to buy RAW BM 500 or TM 1000 caliber does not matter

    This listing has been renewed
  2. bearbar

    Barrels Wanted to Buy 30 caliber barrel with 16 twist for a RAW

    Looking for a .30 cal barrel to put on my Raw BM500 It needs to be at least 16mm outside dia I would like around a 16-twist rate, but I can go a little faster maybe 18 I can do the machining to make it fit
  3. bearbar

    30-Yard Challenge

    These targets are the 30-yard challenge I shot these 2 cards today with my RAW BM500 sub-12 FPS rifle Distance: 30 yards Wind condition: almost 0 mph Humidity: 98% Temp: 83 Pellet type: on 200-16X QYS 8.2 domed point at 785 FPS for a FPE of 11.25 on the 200 18X JSB 10.34 at 715 FPS for a FPE of...
  4. bearbar

    Projectiles WTB a Thor .22 or.177 cal swag mold either 10 or 20 cavity

    I am looking for a Thor .22 or .177cal swage mold let me know what you have Thanks Rod
  5. bearbar

    30-Yard Challenge

    I shot these two cards today with very switching and variable win conditions. The wind was 5 to 12 mph and very unpredictable. This was shot off of Ahrens pendulum rest. It's a raw bm500 with a benchmark barrel and a 45x sightron benchrest scope. All shots that were close were plugged and looked...
  6. bearbar

    PCP Rifle Want to buy RAW BM 500 or TM 1000 caliber does not matter

    I am looking for a Raw BM 500 or TM 1000 I would prefer .177 or .22 but a larger caliber does not matter. Please contact me by PM with the details of what you might have and include a few pictures. Thanks Rod
  7. bearbar

    30-Yard Challenge

    Where did you get the rifle, it looks like a USFT MAC 1 and a RAW had a baby??:) Nice shooting
  8. bearbar

    30-Yard Challenge

    Had a chance to do some night shooting on our range tonight, I shot the 30-yard challenge target. The wind laid back and was almost nothing, but I think I had some thermal up drafts because the wind flag under my target was swinging back and forth like a pendulum, it made shooting quite...
  9. bearbar

    30-Yard Challenge

    So I shot two cards today. The wind was quite difficult. It wasn't quite as much wind as yesterday but it was really switching back and forth I made a mistake on the one I have the x marked as no as the one Target I threw out. The big heavy red x is the one I threw out
  10. bearbar

    30-Yard Challenge

    Held in the 7 ring on a right to left wind and got an x estimate 9 mph wind
  11. bearbar

    30-Yard Challenge

    Shot this card Saturday at our club PSA in Palmyra PA winds were switching and unpredictable ranging from 5 to 12 miles an hour. I used a Raw BM 500 with a Benchmark barrel. It is a sub-12-ft lb. rifle shooting JSB 10.34 pellets at 715 fps, scope was a Sightron ED 45x45, I was shooting on an...
  12. bearbar

    Custom Target for Practice

    Here is the range rover I was talking about
  13. bearbar

    Custom Target for Practice

    could you post a component list from Amazon. This is a neat Idea A made a unit called the range Rover. It is a remote control Target that goes from the firing line out the 55 yd. You can run it out with a remote and bring it back in with a remote. You hook a tape to it that tells you what...
  14. bearbar

    Resources AA HFT500 Good for Benchrest? - OK, prove it!

    Just my opinion on the scoring of the target bull 18 and bull 25 If you look really close the bull # 18 the shot was below the 10 ring and the tear in the paper went out the bottom as for the bull # 25 the shot was above the 10 ring and the tear in the paper went towards the 10. I have scored...
  15. bearbar

    Projectiles Older JSB Pellets Gray and Red tins 22 and 17 cal

    I am looking for the older JSB pellets in either 17 or 22 cal. Please look at the picture enclosed for what I am looking for.
  16. bearbar

    Epic Airguns

    I made a spanner wrench for a cap on the end of an air cylinder. What I did was to find an open wrench that goes around the part you want to take off and push the bottom of the wrench aginst the cylinder mark the wrench where the hole is in the barrel nut and then drill thru one of the ears of...
  17. bearbar

    Accessories Want to Buy RAW Bench Rest stock for a HM 1000 X

    This listing has been renewed
  18. bearbar

    Accessories Want to Buy RAW Bench Rest stock for a HM 1000 X

    This listing has been renewed