Search results for query: *

very interesting. have you tested these for a prolonged period? how is the consistency? my .22 leshiy came with two 0.2 nozzle and I want to try bigger jets. thanks a lot for sharing

you are welcome! if you are using .177 I have attached a .177 version which has a 5mm pellet path. did u notice any difference between the normal and B model? I have the 350mm barrel so when I designed the B model the barrel doesn't actually go past the holes in the baffle but in your 250mm...

Try printing a 3d benchy (you can find it on thingiverse) If the quality is good Then you can start printing the baffle using the settings i posted before. You can use petg or abs for the baffle. 

the .22 baffle hole size is like 6.1 mm and the .25 is 7mm. if you don't feel confident in the quality of the pellet path you can use an Allen key and force it into the baffle's pellet path all the way through and rotate clockwise and counter clockwise until the pellet path is smooth and...

Enjoy! I want to make mine mouse fart quiet. so in my free time I will work on something that extends the moderator length by ~90mm which allows me to double the baffle length and make more design tweaks to it. :D it will also allow for installing longer barrels while retaining the stock...

barely any to be honest from my experience. to check you can put the muzzle under a pillow then dry fire it. you will barely hear anything. the air blowing from the rear of the moderator is actually a welcome thing because it vents the high pressure air building up in the moderator instead of...

Sure

I was planning on making a full tutorial but I really will not have enough time as I will be very busy and it is very easy anyway. I will give information as much as possible. Disclaimer: I hold no responsibility whatsoever if you damage your air gun while using this baffle. every 3d printer...

of course i will release for .22 .25 and .30 (i only tested .22 though). yeah the printer is amazing but for this specific print.. some post processing is required to ensure the tight tolerances are met because it has to be printed horizontally. which is why I will post a basic tutorial on...

its basically finished now and I don't see any possibility for further improvement. as this is 3d printed and 3d printers quality vary a lot between each other I will release a full tutorial by the end of this week on how to print it (orientation, infill, support.. etc) and how to install it...

When i got my leshiy 2 .22 350mm it was way louder than any other airgun i have and i wanted to use it in my backyard without disturbing the neighbors so i modeled and 3d printed a baffle which reduce the sound from 95 db to 75 db. (long range accuracy not tested) Up to 50m the accuracy is...