Search results for query: *

I'm interested in the Huben K1, but my biggest issue with that particular airgun is the weak safety feature. I saw on Reddit a post where somebody added a second safety by adding a bolt lock attachment to the magazine. reddit post here The idea is that the bolt prevents the magazine from...

Maybe I will try to fix it first myself. One is about 10 USD/EUR x 4 + shipping probably 50 (+ 2 on top of loading block). I wont pay almost 2 ounces of silver for 4-6 plastic nipples. I saw some POM/delrim rods in various online shops , might be an option to get a package of those in the...

I managed to track the source of the problem. The pucks on the bottom of the loading block (Cocking lever side) appear to be more worn off then on the other side. I put a patch of reflector tape on both pucks right hand of the loading block and now the cocking mechanism runs smoothly. Apparently...

I think I was able to solve this issue. The old sealing under the bottle pressure gauge was rotten, replaced this with a new sealing. Also the treads from the bottle connector were not in good condition that explains the resistance while unscrewing. There was some play between bottle and...

There are known issues with the gun but the problem in this dimension occurred yesterday after changing the spring. Actually one of the pucks came loose and sticking to the body of the action, but I reinstalled it right after. I made a photo from the other side of the block. The pucks look...

I have quite a headache with a used Impact M2 I bought recently. Yesterday I installed a new hammer spring and noticed a scratching sound while cocking the gun. I reinstalled the old spring and the problem still occurs. When I pull the leaver the loading block is sliding on the half way to the...

Thanks for your answer. Actually the bottle is leaking when unscrewed. I changed the disk seal in the cylinder valve, but still leaking. I think the sealing of the valve pin is worn off.

A few months ago I purchased a used Impact Mk2 (.25 cal) with the old Power Plenum and Huma air regulator. The gun shot well and had no major problems until recently. When I tried to increase the regulator pressure from 160 to 180 bar to shoot heavier slugs, the needle on the fx regulator...