Search results for query: *

Hi everyone, I own a .25 Wildcat and am looking to mount a bipod. 2 options present themselves. A: I drill a hole in the stock and mount a swivel stud B: I get an Fx tube clamp and mount it that way. But I am a little aprehensive about resting the weight onto the tube. Any experiences...


Still fiddling around a bit but this group was shot at around 170 bar

Hi everybody, Yet again I could not resist a good vintage pcp :) The Webley was leaking air all over the place and upon inspection all the o-rings had hardened and were worn out. After refitting all the new o-rings and shooting the thing over the chrony I noticed it was shooting ridiculously...


probably because most people see old as not as good i presume :)


just for you now doogy but i tell you my written french is a bit rusty ;) j'ai utiliser les pastilles jsb 15.89gr en 5.52mm le Falcon n'est pas équiper avec un régulateur et c'est le meileur raison que je suis si content ;)

A quick little 8-shot group shot at 30 meters outside with a little right to left wind a 1 eurocent group, pretty pleased about that since I don't really know the gun all that good just yet :) Gotta love good craftsmanship :)

No I don't have one of their pistols (yet). The bolt ran a bit rough at the beginnen but a bit of silicone grease cleared it right up :) now it runs like clockwork! Still playing around a bit with pellet head sizes and velocities but I truly am amazed by this rifle and it outperforms me time and...

Finally after a lot of trading and trying I found (yet another) air rifle that will not be leaving me anytime soon. At first glance I was a bit sceptic about the "older" mechanics of the Falcon but after shooting it for a bit i was sold. Was shooting 8shot groups pellet on pellet at 30 yards...

After sulking for a day I picked myself up and went back at it ;) Took another good look down the bore and noticed at the end where the choke starts, there are some imperfections and scratches (manufacturing or previous owner who's to say?) cleaned it up a bit and (for now) the initial results...

UPDATE:Ok, I have to start with saying, I really had high hopes but now I'm kind of done... This might be a fluke but it really has put me of crosman related items... still awaiting the price for a new barrel...the results with bigger head diameter pellets:

unfortunatly the @$*# courier did not deliver as reported so i'm stuck waiting another day :(

I ordered a collection of 5.53 pellets and they will be here tomorow so i will update results after that :) and if not tomorow then the day after :p 

I am very thankfull with the info but when it comes to replacement barrels does anyone know of an option i can buy within the EU since shipping from america costs me an arm and a leg.. :)

I really hope I find a good pellet because who is not to say that if I buy a new barrel I won't have the exact same problem and then I'll be standing there with 2 oversized barrels and a couple $$ less...

anyways tomorrow at first light i'll be shoving some big a** eunjin pellets through there to see wether they make a difference :)

didn't push it all the way through but just seeing the first few inches gave me a pretty good idea that the barrel is way too wide for normal .22 pellets

will not be able to return the gun since I got it through a trade so i think if the larger head diameters won't cut it i will be looking into a new barrel :-/

A quick update: the barrel has been cleaned before shooting. as aj has recommended me i started to check the barrel if it was oversized. i loaded a pellet and proceeded to push it further about an inch or 2. i retrieved the pellet by pushing it back out with a cleaning rod and found that the...

Hi all, i have recently received a marauder in synthetic stock .22 i have tried all pellets recomended for thus gun and still it is unable to keep groups within even an inch at 30 yards... sometimes it gets a stroke of good accuracy butthen it just fades away again... i have tried without the...

Nice shooting :) is it me or does the gun have quite a bark to it?