Search results for query: *

AEA HP Max .50 pistol, 11” barrel, steel working muzzle brake and foster only filling.

AEA HP Max .50 pistol, 11” barrel, steel working muzzle brake and foster only filling.

Marauder, no ear protection needed. HP Max, its as loud as my 9mm service pistol but almost 2 times more powerful compared to 9mm Ruag 3 or 4 ammo.

No silencer, just a big muzzle brake. It’s very loud, it will make your ears ring. In the garden I shoot trough a big plastic barrel filled whit foam, keeping the muzzle in the barrel. Works better than a silencer and the sound is like a bass drum. The HP Max is standard about just as long as a...

Made my version, 11” Barrel

This listing has been renewed

This listing has been renewed

AEA HP Max .50 pistol 11” barrel and muzzle brake

I’m not angry, I just make a point. There are chokes specialy made for big bore AEA guns.

No choked barrel on AEA guns. Shooting slugs out of a choked barrel? Beside, I do whatever I want with my properties.

For sale, DonnyFL Ronin .45 / .50 M18X1 for sale. The silencer is modified whit stainless steel wool around the stainless steel mesh in the core. Asking 100 euro excl. shipping costs. Pictures will follow.

The Huma regulator is around 100 euro and the AEA FAC kit is around 50 euro, I spent around 8 euro to make it FAC. Meanwhile I shortened the barrel to 11 inch length, so the muzzle brake is almost flush with the gastank. Pictures will follow when the barrel and muzzle brake are back from the...

I have a DonnyFL Ronin M18x1 for sale as I'm planning to shorten the barrel. The silencer is filled with stainles steel wool to accommodate the pressure, and gives more efficiency. Price, 100 euro unnegotiable.

I am planning to shorten the barrel about 2 inches so the muzzle brake ends at the end of the gas tube. My barrel is around 14 inches and can take muzzle brakes or silencers whitout adapters on the European version. Maybe someone in The Netherlands with a 13 inch barrel is interested in a barrel...

This is how mine looks today. Powdercoated barrel and muzzle brake, QD in the pistol grip and a Laser for in the Garden.

If you want to use the foster valve, you have to make sure that the delrin o-ring has a big enough hole. Maybe you have to make the hole in the delrin o-ring a bit bigger, so ghe foster valve is not crushing it in and the small hole is blocked.

sorry for the late response, you did it right. Where you put a single screw in the tapped hole, i put 3 headless screws with mastic kit to close it under tension. Like this you don't have to use the tube inside to close the hole, which is open after you remove the regulator. Did you also open...

No issues with the O rings on mine, except on the fill probe. Fill probe O rings are prone to fail sooner or later or cause leaking by torn off rubber in the valve. So I put a Foster valve in place of the second gauge meter. So actually I was happy I could just replace the gauge meter for a...

They don't have a spring , I solved to put a spring of a biro / Bic pen in it. When the gun is totally degassed, you have to pull the breech lever a bit back, to make the valve sit in the transfer port. The little spring helps to push the valve in the seal. You can also cock the gun before...