Search results for query: *

I think I was not clear enough. When the bottle is off the gun. The corbon fiber bottle has a steel valve in it. There should be an o-ring between bottle and steel valve. Also, the male thread on the gun is a separate steel part, it should have an o-ring underneath where it is screwed...

Check orings whre valve attaches to bottle and where male bottle adapter attaches to gun.

O-ring in blue area would be very dangerous. Air would not bleed off and you would have pressure until bottle came off threads launching bottle. Red o-ring difficult to install properly. These are fx valves or at least were on the LCS.

Should be normal. So you don't fight the rifling closing the bolt.

Pgp. I remember people were collecting them on mcarterbrown

Front cover plastic c shaped thing is a gap filler to keep slugs from dropping into space around barrel. Part didnt exist on original K1's.

There is no mag to barrel seal. You have to put the barrel in until it touches and then back it off 1/8 of a turn, maybe less, so that the mag rotates freely. Gap should be .010 inch or less.

There is a standard. It's the foster standard. The chinese copies are metric instead of inch and have 2 orings instead of 1. Foster males will fit chinese females. Chinese males will only sometimes fit Foster females. At least you have a female with 6 balls. I've seen them with as few as...

Thanks for the invite. Sounds great for tuning and practice. 135miles. Would love to come by next time I head to San Diego.

Thousand oaks is great if you have a friend with big back yard and a hill for a backstop. Maybe friends with farmland in Oxnard?? I live in Chatsworth and work in Valencia (customers in Thousand Oaks and Oxnard so I'm out there all the time). May not be legal but if you are safe and don't...

You will likely You will likely have to head north. Public b l m land is hard to find.Before you get to the mojave. You may want to check out c. ASA in little tehanga, Canyon

I'm confused why are the threads on the reg body showing and the o-ring isn't hidden?

Reg vent? Screw that adjust regulator? There is a sealing disk to seals the back of the piston. When you lower pressure below zero it vents storage air (as opposed to plenum air)

Where does it leak?

No worries. You don't need the filter in the test unless you think it's leaking. The idea is to have a baseline that is quick and repeatable so you can check performance sporadically or if you think there is an issue. My manual states 30seconds to 4500 psi (on factory length hose). It was...

Walmart wont take airguns back. Even new and unopened. Watched a woman fail to return red ryder to walmart. High dollar specialty store I would expect a restocking fee (cover inspection labor)

The 27 seconds is now your standard. If you have any issues just do the same test and decide if you can live with the results. Not all small leaks are worth tracking down, no need to replace the seals if the time is liveable. I think mine goes to 4500 in 30 seconds, my friends takes 34...

Link please

https://battlehawkarmory.com/product/umarex-gauntlet-pcp-.25-cal Gauntlet for $265 (not the new gauntlet 2 but a regular gauntlet). I had one and it shot great.

Anything huben. Just works.