Search results for query: *

RScott vertical plane,,, verticle reticle, alignment of gun bore with verticle reticle,,, THAT IS THE KEY,,, that is all there is,,, period alignment in the same plane,,,, but not parallel we are intersecting a verticle line to a horizontal bore hole as to distance, we use 20 MOA rails or...

several yrs ago I sent Krale a photo of my driver licence, to purchase a Weihrauch HW110 22 FAC if you want to buy a pack of stinking cigarettes or a beer, ya need ID,,, no problems with sending Krale a photo, of my photo id

the pump has a leak,, check/tighten all the threaded connections, don't forget the bleed valve, it needs to be tight where it threads into the pump and closed snuggly

No,,, the gun is not cocked, Weihrauch HW44 cock on closing the question is? what?

I was just wondering how you were doing, sounds like you are doing very well,,, bitten by 'adjustable',,, and healed

all of them none of them like corn holes, there is a million and one opinions got any good Questions?

the 310mm barrel is for the K model which has a shorter forearm stock, where the normal barrel is 410 mm the FAC is long 600mm barrel that is in my photo,,, black HW110 FAC on the left

been a really good month for me, got my summer project done so my attention went to replacing the barrel, went easier than I thought 2" longer and twice as thick, barrel flip is gone, I do not remember the velocity of the pistol barrel,,, darn I am quite excited with my little HW44 carbinized...

quiet, and I own everything out to 35 yds leaning on a window sill, this thing is a sweetheart edit: I have the HW110 mod on it for very quiet, but not in photo

OK, try the other way then, see what happens

try turning the turret clockwise,,, to raise POI,,,point of impact

Hw44, with rinks carbine stock, ratworks airtube and a 310mm barrel for a HW110, Optisan cp 3-12x32 and a ODb 110 moderator for now 16 gr AA @735fps 30 shots per fill @200 bar

I am still glad I have one, still working fine just shakes a little,,, even if I have to change the 4th stage, still much happier than I was with Yong or Davv I got mine from diveshop in Spain, so I am probabley out of luck with any warranty

the Zons are useless to me, as they get crooked in the mag and do not feed,, in my SPA P-15 using Carm mags I do not have a single shot tray to test with and don't use in normal pesting,,, so I do not know how well they MIGHT perform,,, I gotz no patience for such stuff I will stick with the...

thomasair thanks for the heads up,,, I've only 22 hrs on mine but I do realize the damage potential ,,,as vibration is the outward indicator of a problem,,, having played with IRD vibration monitors in my past life. I will consider buying a 4th stage kit to be prepared and inspect wrist pin fitment

here is a video

back to the OP what is the gun??? how does it group without moving the crosshairs and trying to zero? How did you align your scope to the barrel? I use the mirror method, simple and trustworthy basics first

the optisan 3-12 weights only 17.17 oz,, the 2lbs under UA web sounds like the shipped weight https://www.trenierairguns.com/product/optisan-optics-3-12x32-cp-mil-mh10/4?cp= optisan site https://optisansportsoptics.de/

ball hone,,, quoting motorhead "Tearing it apart did a ball hone job on inner tube surfaces placing a nice cross hatch on compression bore & also deburring the cocking slot & holes that the seal must pass over when fitting said seal and final assembly. "...

I will give them a go,,, ordered 2 boxes,, test 1,2 ,,,1,2,3, test test