Search results for query: *

Just recieved my Saber Chassis....but no screws for connecting the 2 pieces stock and no screw for connecting with the action DRS!!! 3 sacs with tiny 'additional support scew' are in the box. Can someone tell me the right lenght an thread for the 2 screws for connecting the chassis and the...

So there are 3 versions The one on the top is Tactical Folding - 714euro The one in the middle is Sport - 730euro And the one in the bottom is Tactical, which is not folding - 690euro Michal AERON CZ

Forgot to say...regpressure in my comfiguration is 95 Bar. Hammer spring screw turned out reasonably

I must say this is a very sensitive gun with the tuning! Right now with my .22/500mm barrel and large plenum I do a 60 round on a refill. Pellets are 18 grains and are shot at 892 fps (272 m/s) Something minimally different in the settings can result in half the shot count and therefore a lot of...

I'm just curious, has anyone already sent a warranty case back to Krale from the US? Then I would like to know how long it took to repair the rifle? Shipping time not included. So the moment the rifle arrived with them until it was ready for shipping again after repairs.

I had no problem with the screws for the large plenum, but they only included 3 instead of 4.I did have a problem mounting the angled manometer bracket, the thread in the plenum was not tapped deep enough

Krale sent a message weeks ago that the probe should no longer be used, the few next days the new one arrived.

That's how I did it now, went to the store to get an M4 machine thread tap blind hole ($16) and then carefully tapped it to the bottom. Next problem, after replacing the normal plenum with the large plenum, there is now a leak. That opening with an O-ring 10.0x1.0 NBR90 (no. 44 on the parts...

Does anyone else have problems mounting that angled manometer bracket on that large plenum? It seems that the screws (M4x16) are too long. But I think the internal threads in the plenum are not tapped deep enough. However, the hole at sight is deep enough. What do you propose? use a blind...

Has anyone already removed the cylinder? I need to install a new regulator, but I can't immediately release the pressure cylinder. Is it just screwed into the block with loctite???? (not logical) Just rock solid

I have my V2 since today. Thing is acting crazy, registering +1070 FPS without me shooting. Apparently it registers the effective shots well (+- 901 FPS with the FX 18 grain pellets). App is the Android version.

I think with the medium plenum it should be no problem at 20fpe. With the sub 12 ftlb plenum you will probably have to increase the reg pressure and hammer spring tension so that the rifle will react very nervously and your shot count will drastically decrease. I would definitely go for the HP...

Just to mention... I recently received an email from Krale that the filler plug from the first batch of DRS may no longer be used and that they would send a new one on Monday...but no explanation why. However, after checking, I quickly found out what the problem could be. Because this is a...

Extensively tuned this evening... rifle now does 274 m/s or 899 fps with the 18 grain. shot count is 49!!! and pellets start to drop with a cylinder pressure of 75 bar. I suspect that the reg pressure will be about 80 bar and those extra shots are the result of the large plenum that does not...

From Krale, 3 or 4 weeks ago. Europe Airguns has it in stock

Nono, the 3 screws in the package are not too short, it is just you need 4 of them :ROFLMAO: Those longer screws on the picture are from the smaller plenum

Finally received the large DRS plenum (sph) today. The next problem is that the angled manometer bracket that is now for sale as an accessory for the M3 does not fit completely. The supplied screws are too long and the recess provided for the M3 is in principle not necessary. So I suspect that a...

We have thought of this, turning the original screw with a 5 mm hexagon and the set-screw with a 6 mm. So hammer spring tension is easy to adjust without removing any screw (y);)

I also was thinking that! I know that HuMa is following this closely....perhaps:cool: For now I ordered a big FX plenum, although visually I think this is a bit too big, especially with a walnut stock. Does anyone know what the volume is of the three plenums that FX offers?

Next problem solved... The fact that the hammer spring screw is so loose has made a friend and fellow shooter me a wonderful solution. He turned a screw himself on the lathe that now serves as a counter to the original screw. It is now very easy to adjust the hammer spring without it turning...