Search results for query: *

I fixed my DRS Slow shot. Polish the valvepin and install a NBR 90 oring instead of PUR. Solved. https://www.airgunnation.com/threads/fx-drs-slow-shot-solved.1334156/#post-1981649

The O-ring design from Accu-Shot doesn’t really make sense. If it sits in a conical seat, it will eventually clamp down on the rod over time. You can use almost any material you like. The only logical solution is to use an O-ring that sits flat and is secured in place either by a locknut, or...

If this was the case, the top plane wont fit anymore since the plenumneck is longer as you stated. With the new valve rod from FX I only have 5mm with the c1 installed, my old valverod had 6mm with Mubhaur his part, there was no difference even if the part “may” be longer

Do you really think that FX listens to their customers? A big no. Instead, they machined the old parts "fix" the issue. FX fixed it with a really cheap method. Mubhaur his part is honestly the best design.

Im considering an Uragan 3 aswell in 700mm in .22cal. Those Uragans are powerhouses

You are the only one that doesnt understand it then.

This problem was solved under a week by Huma. Even a bump didnt release the trigger, I know it because I have it on my Impact. The trigger only released if you were putting a decent pressure underneath. You call “airgun toy industries” . I dont know why you are here then, sounds like a hater...

Check the forums about the slow-shot issue, it was solved by the community, yet FX chose to ignore it for over a year. Now they've “fixed” it with a drilled-out part, but no one really understands how it works because FX hasn’t provided any explanation. I shoot benchrest too, and I've heard...

The plenumneck from m3 and first generation m4 had a conical shape in the plenumneck. The oring was clamping on the rod under pressure. Its all.

A permanent fix is to revert to the MK2 pre-powerplenum system, which uses a locknut to hold the O-ring at a 90-degree angle, preventing it from clamping onto the valve rod. @mubhaur makes this part.

This is the new part. Basically if the oring leaks, you need to buy a new part. The plastic prop you need to press in it would be a hell to remove. Look at the plenum neck how thinn the aluminium is, I think FX should think twice using this at high pressure.

I have that one already in my Impact. That is not going to stop the slow shots. The slow shots is an oring in the plenum-neck that extrudes on the rod.

The plenum neck is the only issue, all other parts are not relevant. It has been proven for so long. Mubhaur his part fixes the issue without replacing 5 parts.

Do you hear the hammer on the Leopard? I have a Wildcat MK3 Sniper and when tuned for high power you can hear the hammer because its under the cheeckpiece.

Looks like the old plenum parts are drilled out. A cheap fix for a flagship model and “premium” manufacturer

Go for the 25/26 grains. I think you lose 15 FPS per grain you go up. So in theory a 25 grain would still shoot 970FPS.

Using a moderator? Could be clipping.

You have set it from 0 yards, change that to atleast 20 or 25 I do mine from 25, 50, 75 and then 100 It measures at the muzzle and then goes to 25 and up

I can confidently say this is the best trigger available for the MK2 and M3. I’ve been using it at the range for the past two weeks, and the performance is outstanding. I installed mine the day afther it was released. Be aware that installation does require some work, so I strongly recommend...

Yeah, its kinda the same block but only a few details are different