Search results for query: *

This listing has been renewed

Looking to sell these Rapid barrels. SOLD-Top one is a .22 cut down to 14" Second one is a .25 cut to 16.5" The .25 will come with one mag and a probe so you can change over your gun. These fit the std Theoben receiver and both are choked. Work was done by AZ as far as I know. Asking $75.00...

Looking for a 19" .22 barrel to fit a Rapid MFR. I would be interested in the complete barrel and shroud or a std size .22 barrel without shroud. I have a shortened .25 barrel, mag and bolt probe to trade or sell.

That's my next step. But I don't know why it would shut off at that pressure everytime . I also had one of the originals and it would only go to 2000 or so but it just kept running and not building pressure. I did a full rebuild on it and worked great after that. It had about 30 hours on it at...

I will be going over it again tonight as I have been gone for a few days. I will double check it for leaks just to be sure.

I am working on a Krypton 4500 psi compressor that belongs to a friend of mine. It will only go to 3000-3100 psi and then shuts off. Temp is running around 74 c and 65 c with ice added. I disconnected the temp wires , no change. Disconnected the pressure guage, no change. I bypassed the...

Looking to sell this Mamba Lite 4x16x44 scope. It's in good shape but has some minor wear marks from being used. Glass is great and everything works as it should. This has the SCB reticle but it is not illuminated like pic on box. Asking $175.00 tyd REDUCED NOW $160.00 [email protected]

if its not the rubber piece as stated above then I believe that may be part of the large damper orings around the hammer spring. There is usually two of them back to back and one will roll and get caught in the sear then rip pieces off. Whenever I have one in for service that has the orings in...

Like new Notos. All original and untouched. No adjustments made. It shoots great with CPUM at 790 fps and also likes JSB's 15 and 18 gr. It gets three mags on a fill. I just don't use it so it needs to find a new home. Includes the box, 1 mag, single shot tray and a new replacement fill probe...

This listing has been renewed

This listing has been renewed

All for one price. I will ship in a large box. Couple 760 Crosmans, one in pieces. Couple Daisy Eagle's. They don't shoot. Daisy 880, very nice, shoots but weak. Crosman G1 Extreme .177. Shoots but inaccurate. Winchester 800x, shoots but very rough. These are all considered parts or project...

Used Huma reg for Huben K1. I had this in my 2018 .22 for a couple years and it started acting up so I took it out and put factory reg back in. This will need to be rebuilt as it was creeping and not recovering . Asking $80.00 shipped [email protected]

Here are a few pics

There is about 10 or twelve of us locally that have Hubens. We love them.

This is after aligning barrel. The 1st target shows group at 40 yards when I got it and second target is after aligning.

Kelly at KraZcool is a great guy to buy from and will help you out if you need anything or have questions. He works another full time job so his responses can be delayed a bit.. Here are some pics when the barrel isn't aligned correctly.. a friend brought me his gun and said it wasn't shooting...

I didn't have it very long. It was ok

I've rebuilt a bunch of these but never made any videos. Took a few pics is all. Here is my current one. It's a 2018.

Hubens are awesome guns. You just have to adjust it correctly for the ammo you are shooting. Most of them I have seen and shot do better with 18 gr and 25 gr JSB. Some newer ones like slugs, older ones not so much. Never had much luck with the15.9 gr but never shot them too much either. I've...