Search results for query: *

I just got 5 tins in .30 cal for a project I’m insanely gonna try. I swore off big break barrels but that huge pellet called my name. 🤣

A good hunter tries, a poor hunter expects.

You may not, but sanding and polishing the rear section is the only way to remove a gouge. Ball Hone will not and WILL HANG UP IN THE SLOT ,OR ROUND IT OFF .. The rear section has very LITTLE to do with anything other than smoothly cocking and fireing As stated , a Vortek kit would be...

8 ft lbs is fantastic. 👍

Is it cocked and won’t fire ? If so the trigger is out of adjustment or jammed up with dried grease from sitting. Old Hw Grease turns to glue. Its a easy fix but first you have to get it unlocked which isn’t hard for someone familiar with them. For the mean time KEEP IT POINTED SAFELY AWAY...

This is the final post against , as I stated before If you have read the whole thread “shot placement is KEY. HEAD SHOTS ARE MANDATORY. BODY SHOTS WILL BE DEAD RUN OFFS I would keep it under 25 yards ,, 🧐. ” As good as a shot as many claim to be , WE ALL MISS AND MISS HIT AT TIMES. .. A...

Did you lube the cocking shoe slot. The new shoes ride on the chamber and do not push down on the piston. They are of soft cast or sintered steel and will gall .. take the stock off and lube the whole slot with a good moly based grease and don’t be shy it’s not gonna transfer into the...

I’d rather miss fast than wound slow. 😉

couple of hundred. Big hunter. ……. 🧐 one Of them Chris Kyle type. Nothing fires up the pellet gun world more than telling a 12 ft lb and under group that they don’t have enough power. Shot away there with what ever you want. I never said you can’t kill with 12 ft lbs ...

Any way you look at the picture it’s still the same outcome. Strip it or send it back. It sure isn’t gonna fix itself without more damage smoothing a galled area permanent. 😉

Knowing what type of gun might be better , springers , pcp. ?

Here we go. a 14.3 grain .22 pellet will have more energy Spread than a .177 8.4 any day all day. I see Very little use for hunting with 12 ft lb and under guns as your run off rate is much higher unless you are “you”. And all the other sub 12 ft lb snipers who never miss .. even at 70 yards...

A 12 ft lb .22 will have more kinetic energy than a 12 ft lb .177. Thus more knock down power.

shot placement is KEY. HEAD SHOTS ARE MANDATORY. BODY SHOTS WILL BE DEAD RUN OFFS I would keep it under 25 yards ,, 🧐. ( me waiting for the sub 12 ,Carlos Hathcocks to chime in). SHOOTING A 12 ft lb pcp you do have the advantage of easier head placement. With no moving action as in...

Contact Tony Leach. He is the best Tx guy there is. He does several neat things. 22 mm piston conversions and others. He is UK BUT Nitrocrusher here is his importer dealer. Tony is alot like my self ..Extreemly busy and sometimes gruff as it’s tough answering constant questions and giving...

The rear area never sees any sealing like the actual compression inner chamber. That’s more sacred than my girls compression tube… you need not worry as much as more so getting all ridges gone or softened enough that the piston seal can pass un cut By them. Once in the piston should have been...

Use it or loose it… 🤣

You are going to use a hand drill and sand paper drums With a extension if need be.. Feathering each way on the sides and around towards the top. You may not get rid of all of it but smooth out the edges so seals are not cut on the way in. Using a new Vortek kit willl keep the piston centered...

If someone is hard to get and hard to find there is a reason for that.. 😉

Ok. After reading tonight about a poor soul who BAUGHT a 20 year safe queen gun and second cock it’s locked up. It rings a bell of reinforcement on why using them at least once a month is not only rewarding and pleasing .. Its mandatory for proper lubrication dispersion. Heat created softens...