Search results for query: *

Removing 8 Philips head screws and there is a 2 pin connector that just pops off. Would take less than 5 mins. I googled the number off the battery and found them on Amazon for a reasonable price.

So apparently you can get a replacement Lipo battery off Amazon for $15.00 bucks. Just took my V2 apart to confirm.

You might be able to ask around for a tune if someone has one. I'd make a separate post explaining what gun, caliber and grain weight, someone might have the same setup and be able to shoot over some settings

The slug liner or "heavy" as I like to refer to it is for a different twist rate. Anything below 26 grain should work in the standard liner and anything 26 and up is going to need a faster twist rate (heavy liner).

Yes it will.

As someone who works in the industry, I can tell if they don't use one on a shoebox compressor just by the smell of the parts during disassembly. I can't explain how they work, but they do.

Depends on the grain weight, what speed you are looking to get to and barrel length. If you are going .22 caliber, anything over 25 grains will need a heavy liner. You'll probably want the 8mm hammer weight or tungsten if you are getting up there in grain weight.

What hammer weight?

If you are really interested in shooting slugs, I would step it up a model or 2 like the Maverick or Impact. The Dreamline is getting pushed to the max with .30 caliber and a decent grain weight slug. You'll also probably want to change out the hammer weight to tungsten on the Dreamline.

You can shoot slugs that weigh less than 50 grain, if you want to shoot a higher grain, you would want the "heavy" or slug liner.

Might get a little further with the 13.4s

🤷‍♂️

Nice collection

Utterly ridiculous and amazingly awesome at the same time. For those of you who haven't had the opportunity to look and shoot down a Theos (def wasn't mine), all I can say is that it's worth the money if you have it like that lol.

They changed this to 11 gram weight before the Maverick came out. 11 is standard now.

Javelin .250 diameter 40 to 44 grain is what we tested with awesome results. The 600mm comes with a heavy liner and a transfer port too large for good pellet use. If you want to use pellets out of a 6 or 700mm dynamic or panther, you can swap the liner and drill the opposing side of the brass...

Try these settings 95 Bar on the regulator, Macro 7, The full length of the hammer adjuster measured outside of the gun is 20.2mm and a 18.1 grain (what the gun originally shot from the factory) should be around 900FPS. If this doesn't work, I'd pull the hammer spring and weight to verify they...

What is so complex about the Impact? I strip the gun, sonic clean all the parts, and fully reseal within an hour.

The panthera/dynamic is fairly easy with the exception being the plenum seals and the seal around the valve seat can be tedious to remove and replace. Other than that, it's simple.

I voted 25k plus, but I happen to work in the industry and shoot every day at work for testing. I never wait in between shots, I usually shoot like a magazine a minute for ES and SD testing.